The Lash Confessional
Every lash artist has something to confess.
Retention that won't hold, adhesive playing up, a client who's reacting. The Lash Confessional is a diagnostic tool for lash artists: start from what you can see, find the actual cause and know what to change, so you diagnose rather than guess.
Choose Diagnose a problem to be guided through a few questions, browse every symptom and cause in the Full matrix, or go to the Safety pathway. If a client has symptoms, always start with safety.
WHAT'S ACTUALLY GOING ON?
01 Client consultation and suitability
CON-001Client expects retention beyond what the natural growth cycle allows
Routine
Likely causes
- Misunderstanding of natural shedding
- Promises made by a previous artist
- Social media expectations
- Infill interval too long
How to identify it
- Ask what 'good retention' means to them
- Review their usual infill interval
- Check whether fallen extensions have a natural lash attached
Corrective action
- Explain that natural lashes shed daily and take extensions with them
- Agree a realistic infill interval
- Record the conversation on the client card
Prevention
- Cover retention expectations at every first consultation
- Give written aftercare that explains the growth cycle
CON-002Client requests a style their natural lashes cannot support
Routine
Likely causes
- Inspiration photos taken on different lashes or edited
- Requested length, curl or density too heavy
- Client unaware of natural lash limits
How to identify it
- Assess the number, length and strength of available healthy lashes
- Compare with the inspiration image
Corrective action
- Offer a technically appropriate alternative and explain why
- Build toward the look over several appointments where safe
Prevention
- Use a consultation script that sets out what their lashes can support before mapping
CON-003Medical or allergy history is incomplete or inconsistent
Caution
Likely causes
- Client unaware of relevance
- Forgot previous reactions
- Form rushed or skipped
- History conflicts with what they say verbally
How to identify it
- Compare the written form with the verbal consultation
- Ask specifically about previous lash, brow, hair-dye or adhesive reactions
Corrective action
- Pause until the history is clarified
- Postpone where there is any uncertainty about a previous reaction
Prevention
- Make the consultation form mandatory before every first appointment and update it at every visit
CON-004Client cannot stay comfortable or still for the full appointment
Caution
Likely causes
- Back or neck pain
- Anxiety or claustrophobia
- Difficulty breathing lying flat
- Pregnancy discomfort
- Needing bathroom breaks
How to identify it
- Ask about comfort lying flat when booking
- Watch for fidgeting, fluttering or repeated movement
Corrective action
- Adjust bed position and support
- Offer shorter appointments or planned breaks with eyes protected
- Reschedule if treatment can't be done safely
Prevention
- Ask comfort questions at booking and note them on the client card
CON-005Not enough healthy natural lashes to support a full set
Caution
Likely causes
- Previous damage
- Medical or age-related thinning
- Very fine or short lashes
How to identify it
- Count and assess lashes per zone
- Check for breakage and gaps
Corrective action
- Recommend a lighter set, a partial set or a lash rest
- Explain the reasons honestly
Prevention
- Assess natural lash capacity before quoting a service
CON-006Client arrives wearing eye makeup or mascara
Routine
Likely causes
- Booking instructions not read
- Came straight from work or an event
How to identify it
- Visible mascara, liner or shadow
- Residue on cotton during cleansing
Corrective action
- Remove makeup fully with a lash-safe, oil-free remover
- Cleanse and dry before starting
- Allow extra time or adjust the service if needed
Prevention
- Include 'arrive makeup-free' in booking confirmations and reminder messages
CON-007Client has had a lash lift or tint recently
Routine
Likely causes
- Recent chemical service
- Client unsure of the date
How to identify it
- Ask when the last lift or tint was done
- Check for curl, dryness or brittleness
Corrective action
- Assess lash condition before applying
- Adjust curl choice to the lifted shape
- Postpone if lashes are dry, brittle or damaged
Prevention
- Ask about recent lash services at booking and record the dates
CON-008Client uses a lash growth serum
Routine
Likely causes
- Serum applied along the lash line
- Oily or conditioning ingredients
How to identify it
- Ask about serums and conditioners
- Lashes look shiny or feel slippery after cleansing
Corrective action
- Cleanse thoroughly before application
- Discuss pausing oily products on application day
- Note any changes in growth pattern
Prevention
- Include serums and lash conditioners in the consultation questions
CON-009Client is anxious or nervous about their first set
Routine
Likely causes
- First-time client
- Previous bad experience
- Worry about pain or damage
How to identify it
- Body language
- Fluttering eyelids
- Repeated questions
Corrective action
- Explain each step before you do it
- Agree a signal to pause
- Keep the first appointment calm and unhurried
Prevention
- Send a 'what to expect' message before first appointments
CON-010Client comes from another salon and wants a fill
Routine
Likely causes
- Unknown products and technique
- Condition of the existing set unclear
How to identify it
- Inspect for stickies, heavy extensions, poor attachment and outgrowth
- Ask about adhesive reactions with the previous artist
Corrective action
- Explain your foreign-fill policy
- Remove and replace the set if quality or safety is uncertain
Prevention
- Have a written policy on fills of another artist's work
CON-011Client is pregnant or breastfeeding
Caution
Likely causes
- Comfort lying flat
- Hormonal changes in growth and retention
- Personal preference
How to identify it
- Ask about comfort and any advice from their midwife or doctor
Corrective action
- Discuss comfort, positioning and possible retention changes
- Adjust positioning and take breaks
- Respect the client's decision and any advice they have received
Prevention
- Ask comfort questions at booking
- Note any changes on the client card
CON-012Client is a regular swimmer, gym-goer or works in heat
Routine
Likely causes
- Lifestyle exposure to water, sweat, steam or heat
How to identify it
- Ask about training, swimming, saunas and work environment
Corrective action
- Set realistic retention expectations
- Tailor aftercare to their routine
- Consider lighter styles that wear well
Prevention
- Ask lifestyle questions at consultation
CON-013Inspiration photo shows lashes that are filtered or edited
Routine
Likely causes
- Social media filters
- Mascara over extensions
- Unrealistic density
How to identify it
- Look closely at the photo
- Ask where it came from
Corrective action
- Explain what the photo likely shows
- Agree a realistic version based on their lashes
Prevention
- Keep a portfolio of unedited photos of your own work to show clients
CON-014Client can't decide on a style
Routine
Likely causes
- Too many options
- Unsure what suits them
How to identify it
- Ask about makeup habits, work, and how natural they want to look
Corrective action
- Recommend two clear options based on eye shape and natural lashes
- Record the chosen map
Prevention
- Use a simple style menu with photos at consultation
CON-015Client is under 18
Caution
Likely causes
- Minor requesting a service
- Consent requirements
How to identify it
- Ask for age and check salon policy
Corrective action
- Follow your salon policy and local requirements on parental consent
- Do not proceed without it where required
Prevention
- Write a clear age and consent policy
Cross-references
CON-016Consultation not recorded or client card incomplete
Routine
Likely causes
- Rushing
- No system
- Verbal-only consultation
How to identify it
- Check the client record before the service
Corrective action
- Complete the record before starting the treatment
Prevention
- Use a standard digital or paper form for every client
CON-017Client has unrealistic expectations about how long a set lasts
Routine
Likely causes
- Believing a full set lasts months without infills
How to identify it
- Ask how often they expect to come in
Corrective action
- Explain the infill cycle and why it exists
Prevention
- Explain infill intervals when booking the first set
02 Contraindications and medical red flags
CTR-001Signs of an eye infection (discharge, crusting, redness, stye or suspected conjunctivitis)
Stop treatment
Likely causes
- Active infection
- Untreated eyelid condition
How to identify it
- Visible discharge, crusting, swelling or redness
- Client reports grittiness, pain or recent infection
Corrective action
- Do not treat
- Postpone the appointment
- Advise the client to see a GP, pharmacist or optometrist
- Rebook only once resolved
Prevention
- Send a pre-appointment message asking clients to reschedule if they have any eye symptoms
CTR-002Scaling, debris or inflammation along the lash line
Caution
Likely causes
- Possible blepharitis or other eyelid condition
- Poor lash-line hygiene
- Product build-up
How to identify it
- Inspect the lash line under magnification
- Ask about itching, irritation or ongoing eyelid conditions
Corrective action
- Do not diagnose
- Postpone if the area is inflamed and suggest the client seeks advice from a GP or optometrist
- If only light debris, cleanse gently before proceeding
Prevention
- Teach lash-line cleansing as part of aftercare
CTR-003Recent eye surgery, procedure or injury
Caution
Likely causes
- Laser or cataract surgery
- Eyelid surgery
- Recent trauma to the eye area
How to identify it
- Ask about any eye procedures or injuries and the date they occurred
Corrective action
- Obtain clearance from the treating clinician before booking
- Postpone if uncertain
Prevention
- Include eye surgery and injury questions on the consultation form
Cross-references
CTR-004Broken skin, dermatitis or eczema around the eyes
Stop treatment
Likely causes
- Active skin condition
- Recent irritation
- Sunburn
How to identify it
- Inspect eyelid and under-eye skin for redness, flaking, cracking or weeping
Corrective action
- Do not treat over broken or inflamed skin
- Postpone and suggest medical advice where appropriate
Prevention
- Ask about skin conditions at booking
CTR-005Contact lenses or significant dry-eye symptoms
Caution
Likely causes
- Lenses worn to the appointment
- Chronic dry eye
- Eye-drop use
How to identify it
- Ask about lenses and dry eye before starting
- Watch for watering or discomfort during treatment
Corrective action
- Ask the client to remove contact lenses before treatment
- Discuss comfort and suitability with dry-eye clients and postpone if symptoms are significant
Prevention
- Remind clients in the booking confirmation to bring their lens case and glasses
CTR-006Previous reaction to lash adhesive
Stop treatment
Likely causes
- Sensitisation to adhesive ingredients, which can persist
How to identify it
- Consultation history
- Previous swelling, itching or redness after lash or similar services
Corrective action
- Do not proceed with adhesive-based extensions
- Refer the client for medical advice if they want to explore options
- Document the decision
Prevention
- Ask about previous reactions at every new-client consultation. A patch test cannot guarantee a future reaction will not occur
Cross-references
Source: DermNet NZ – reactions to eyelash extension adhesives
CTR-007Unexplained or medical lash loss (e.g. chemotherapy, alopecia, hair-pulling)
Caution
Likely causes
- Medical treatment
- Underlying health condition
- Compulsive hair-pulling
How to identify it
- Patchy or sudden loss
- Very sparse or absent lashes
- Client discloses a condition
Corrective action
- Use compassionate, non-judgemental communication
- Do not apply to absent or compromised lashes
- Suggest medical advice for unexplained loss
- Obtain clearance where needed
Prevention
- Train staff in sensitive consultation conversations
CTR-008Unexplained redness or swelling of the eyelids on arrival
Stop treatment
Likely causes
- Reaction to another product
- Infection
- Recent irritation
- Allergic response
How to identify it
- Visual inspection before cleansing
- Ask when it started and whether anything new has been used
Corrective action
- Do not treat
- Postpone and suggest the client seeks medical advice
Prevention
- Inspect the eye area before every service, including infills
CTR-009Client has an eye condition such as glaucoma or uses prescribed eye drops
Caution
Likely causes
- Ongoing eye condition
- Regular medication in the eye
How to identify it
- Ask about eye conditions and drops at consultation
Corrective action
- Obtain advice from their eye care professional before treating
- Postpone if uncertain
Prevention
- Include eye conditions and medications in the consultation form
CTR-010Client has a condition affecting eye closure or eyelid movement
Caution
Likely causes
- Facial nerve weakness
- Eyelid conditions
- Previous surgery
How to identify it
- Check whether the eyes close fully and stay closed comfortably
Corrective action
- Do not treat if the eye cannot be safely closed and protected
- Obtain medical advice
Prevention
- Check eye closure at every first appointment
CTR-011Client has trichotillomania or a history of pulling lashes
Caution
Likely causes
- Compulsive hair-pulling
- Anxiety-related habit
How to identify it
- Patchy loss
- Client discloses the habit
Corrective action
- Respond sensitively
- Assess whether there are enough healthy lashes
- Do not pressure the client
- Suggest support from a health professional if they want it
Prevention
- Train staff to handle disclosures kindly and confidentially
CTR-012Client has a thyroid condition or other condition affecting hair growth
Caution
Likely causes
- Health condition affecting lash growth cycle
How to identify it
- Client discloses
- Sparse or fragile lashes
Corrective action
- Assess natural lash capacity
- Recommend a lighter set
- Suggest medical advice for unexplained changes
Prevention
- Ask about health changes at each visit
CTR-013Client has severe allergies or asthma
Caution
Likely causes
- Sensitivity to fumes
- History of allergic reactions
How to identify it
- Ask about allergies, asthma and triggers
Corrective action
- Discuss risks
- Ensure good ventilation
- Postpone or decline if there is significant risk
Prevention
- Include allergies and respiratory conditions on the consultation form
CTR-014Cold sore, rash or skin infection on the face near the eyes
Stop treatment
Likely causes
- Active infection on or near the treatment area
How to identify it
- Visible blistering, crusting or rash
Corrective action
- Postpone the treatment and suggest the client seeks advice from a pharmacist or GP
Prevention
- Ask clients to reschedule if they have an active skin infection
CTR-015Recent cosmetic injections, peel or laser treatment near the eyes
Caution
Likely causes
- Recent treatment
- Swelling or sensitivity
How to identify it
- Ask about recent cosmetic treatments and dates
Corrective action
- Postpone until the area has fully settled
- Follow the practitioner's guidance
Prevention
- Include cosmetic treatments in the consultation questions
Cross-references
CTR-016Client is undergoing chemotherapy or radiation treatment
Caution
Likely causes
- Medical treatment affecting lash growth and skin sensitivity
How to identify it
- Client discloses
Corrective action
- Obtain medical clearance
- Respond with compassion
- Do not apply to compromised lashes
Prevention
- Train staff in sensitive conversations
CTR-017Ingrown lash or inflamed lash follicle
Stop treatment
Likely causes
- Infection or irritation of a follicle
How to identify it
- Red, swollen or painful spot along the lash line
Corrective action
- Do not treat over the area
- Suggest medical advice
Prevention
- Inspect the lash line before every service
CTR-018Client has sensitive or watery eyes generally
Caution
Likely causes
- Natural sensitivity
- Allergies
- Dry eye
How to identify it
- Ask about sensitivity
- Observe during the first appointment
Corrective action
- Use gentle technique, good ventilation and check eye closure
- Postpone if eyes are irritated on the day
Prevention
- Record sensitivity on the client card
03 Natural lash health and growth cycles
NAT-001Client reports excessive shedding
Routine
Likely causes
- Normal growth cycle
- Seasonal shedding
- Previous damage
- Stress or health changes
How to identify it
- Inspect fallen extensions: a natural lash with a root bulb attached indicates a natural shed
- Check whether loss is spread evenly
Corrective action
- Reassure and explain the growth cycle where loss is normal
- If loss is heavy, patchy or sudden, suggest the client seeks medical advice
Prevention
- Explain shedding at consultation so clients know what to expect
NAT-002Natural lashes are breaking
Caution
Likely causes
- Extensions too heavy
- Stickies growing out
- Rubbing or pulling
- Face-down sleeping
- Rough removal
How to identify it
- Fallen lashes have no root bulb or a snapped end
- Short broken stubs visible along the lash line
Corrective action
- Reduce length, diameter or fan weight
- Check thoroughly for stickies
- Review aftercare and sleeping habits
Prevention
- Match extension weight to natural lash strength
- Finish every set with a full sticky check
NAT-003Natural lashes are very fine, weak or short
Routine
Likely causes
- Genetics
- Previous damage
- Early-stage growth
How to identify it
- Assess diameter and length per zone
- Test flexibility gently with a tweezer
Corrective action
- Choose lighter diameters and shorter lengths
- Reduce fan weight
- Avoid placing on very short new growth
Prevention
- Record natural lash characteristics so mapping can be repeated
NAT-004Uneven density or gaps in the natural lash line
Routine
Likely causes
- Natural growth pattern
- Previous damage
- Shedding cycles out of sync
How to identify it
- Map density zone by zone
- Compare left and right eyes
Corrective action
- Balance visual density with fan width or styling rather than overloading the remaining lashes
Prevention
- Note density on the client card and photograph the lash line
NAT-005Lashes grow downward or in mixed directions
Routine
Likely causes
- Natural growth direction
- Hooded lids
- Damage
How to identify it
- View the lash line from above and from the side
Corrective action
- Choose curls that correct direction
- Adjust attachment angle
- Avoid forcing direction with excessive weight
Prevention
- Record growth direction per zone
NAT-006Lashes damaged by a previous extension set
Caution
Likely causes
- Overweight extensions
- Stickies
- Poor removal
- No lash rests
How to identify it
- Short, broken or thin lashes
- Gaps
- History of continuous sets
Corrective action
- Recommend a lighter set or a lash rest
- Plan a recovery schedule
Prevention
- Prioritise long-term lash health in mapping and product choice
NAT-007Natural lashes are very straight
Routine
Likely causes
- Natural growth shape
How to identify it
- Assess curl and direction from the side
Corrective action
- Use curls that match and lift the straight lash
- Ensure enough contact along the base
Prevention
- Record natural curl on the client card
NAT-008Lashes are dry or brittle after a lift or tint
Caution
Likely causes
- Chemical processing
- Overprocessing
How to identify it
- Lashes snap easily
- Look frizzy or dull
Corrective action
- Use lighter extensions
- Postpone if lashes are badly damaged
Prevention
- Ask about recent chemical services
NAT-009Lashes are very curly or curved
Routine
Likely causes
- Natural growth shape
- Strong natural curl
- Previous lash lift
How to identify it
- View from the side: the natural lash curves away from a straight base
- Extensions lift at the base or tip
Corrective action
- Choose a curl that follows the natural curve so the base sits flush
- Attach a little further along the lash where the lash is straightest
- Check contact from the side after each placement
Prevention
- Record natural curl per zone on the client card
- Keep a range of curls on the tray
Cross-references
NAT-010Lashes are very coarse or thick
Routine
Likely causes
- Natural lash type
How to identify it
- Assess diameter and stiffness
Corrective action
- Choose diameters and curl to suit
- Check contact carefully as stiff lashes resist alignment
Prevention
- Record lash type
NAT-011Many short, new-growth lashes
Routine
Likely causes
- Growth cycle
- Recent shedding
How to identify it
- Count lashes too short to support an extension
Corrective action
- Avoid placing on very short lashes
- Explain that coverage will build at infills
Prevention
- Explain growth cycles at consultation
NAT-012Growth pattern has changed since using a serum
Routine
Likely causes
- Serum effects on growth
How to identify it
- Compare current lashes with previous records
Corrective action
- Adjust the map
- Recommend the client discusses any concerns with their health professional
Prevention
- Ask about serums at each visit
Cross-references
NAT-013Lower lash line or inner corners are sparse
Routine
Likely causes
- Natural growth
- Rubbing
How to identify it
- Map density in the inner corners
Corrective action
- Keep inner corners light and short
- Don't overload remaining lashes
Prevention
- Map inner corners separately
Cross-references
NAT-014Lashes cross over each other
Routine
Likely causes
- Natural growth direction
How to identify it
- View from above and the side
Corrective action
- Choose attachment angles that correct direction
- Isolate carefully
Prevention
- Record crossed areas on the map
NAT-015Lashes are uneven in length between the eyes
Routine
Likely causes
- Natural differences between eyes
- Previous damage or rubbing on one side
- Sleeping position
How to identify it
- Measure or compare lash lengths in each zone on both eyes
- Check for breakage on the shorter side
Corrective action
- Map each eye individually so the finished result looks balanced
- Use slightly longer lengths only where the natural lash can support them
- Ask about rubbing or sleeping habits
Prevention
- Photograph both eyes at the first appointment
- Record each eye's map separately
Cross-references
NAT-016Client reports gaps after rubbing or an injury
Caution
Likely causes
- Mechanical damage
How to identify it
- Look for broken lashes and gaps
Corrective action
- Assess damage
- Suggest medical advice if the area is injured or irritated
- Reduce weight while lashes recover
Prevention
- Teach gentle aftercare
NAT-017Lashes thin with age
Routine
Likely causes
- Natural ageing
- Slower growth
- Finer lashes
- Hormonal changes
How to identify it
- Fewer, finer and shorter lashes
- Slower regrowth between infills
Corrective action
- Use lighter diameters, softer curls and natural lengths
- Consider light volume to add fullness without weight
- Set realistic density expectations
Prevention
- Reassess natural lash capacity at every visit rather than repeating the old map
04 Lash cleansing and preparation
PRP-001Oil or makeup residue left on the lashes
Routine
Likely causes
- Client arrived wearing makeup
- Oil-based skincare
- Inadequate cleansing
How to identify it
- Lashes clump or look shiny
- Adhesive beads rather than wetting the lash
- Client mentions recent products
Corrective action
- Cleanse lashes thoroughly with a lash-safe cleanser, rinse and dry completely before applying
Prevention
- Ask clients to arrive makeup-free and to avoid oil-based products around the eyes before the appointment
PRP-002Cleanser or primer residue left on the lashes
Routine
Likely causes
- Incomplete rinsing
- Primer overused or not suited to the adhesive
How to identify it
- Lashes feel tacky or slippery
- Bonds slide or release
Corrective action
- Rinse thoroughly
- Use primer exactly as the manufacturer directs
Prevention
- Standardise the prep sequence and timing for every client
PRP-003Lashes still wet when application begins
Routine
Likely causes
- Rushed drying
- High humidity
- Heavy rinse
How to identify it
- White or cloudy bonds
- Very fast or uneven curing at contact
Corrective action
- Dry lashes fully with gentle cool air before applying
Prevention
- Build a drying step into the timed prep routine
Cross-references
PRP-004Skin oils return to the lashes during a long appointment
Routine
Likely causes
- Oily skin
- Warm room
- Long service time
How to identify it
- Retention issues concentrated on the area applied last
- Lashes look shiny partway through
Corrective action
- Re-prep the remaining sections following the manufacturer's guidance
- Keep the room cool and comfortable
Prevention
- Work in a consistent sequence and note clients with oily skin
PRP-005Products used are incompatible with the adhesive
Routine
Likely causes
- Cleanser or primer from a different system
- Oil-based remover used previously
- Client lash serum
How to identify it
- Problems started after a product change
- Check the ingredients and manufacturer guidance
Corrective action
- Use cleanser, primer and adhesive that the manufacturer confirms work together
Prevention
- Change one product at a time and record when you changed it
PRP-006Waterproof mascara residue remains after cleansing
Routine
Likely causes
- Mascara not fully removed
How to identify it
- Dark residue on cotton or on the lashes
Corrective action
- Remove gently with a suitable oil-free remover, then cleanse and dry
Prevention
- Ask clients to remove mascara before arriving
PRP-007Lashes not separated or brushed before starting
Routine
Likely causes
- Rushed setup
- Lashes clumped from sleep or cleansing
- Skipping the brush-through
How to identify it
- Lashes stuck together or crossed after cleansing
- Isolation is slower than usual
Corrective action
- Brush and separate the lashes once they are dry and before taping
- Recheck crossed areas before you start each zone
Prevention
- Make a brush-through part of your prep checklist
Cross-references
PRP-008Prep products left on the lashes too long or applied too heavily
Routine
Likely causes
- Using more product than directed
- Leaving primer or cleanser on longer than recommended
- Layering several products
How to identify it
- Lashes feel coated or slippery
- Bonds slide
- Problems started after a change to prep
Corrective action
- Rinse thoroughly
- Use each product in the amount and timing the manufacturer gives
- Re-prep the section if lashes still feel coated
Prevention
- Write the exact prep steps and timings down so every artist does the same
Cross-references
PRP-009Dead skin or flakes along the lash line
Routine
Likely causes
- Dry skin
- Product build-up
How to identify it
- Inspect under magnification
Corrective action
- Cleanse gently
- Postpone and suggest medical advice if the skin is inflamed
Prevention
- Teach lash-line cleansing
PRP-010Cleansing not reaching the base of the lashes
Routine
Likely causes
- Cleansing only along the length
- Brush too stiff or too large
- Lash line not lifted
How to identify it
- Residue or shine at the base under magnification
- Retention poor at the bond while extensions look fine elsewhere
Corrective action
- Use a small soft brush to cleanse right down to the base with gentle strokes
- Rinse the base thoroughly
- Check under magnification before drying
Prevention
- Demonstrate base cleansing to new staff and check it during training
Cross-references
PRP-011Tears or watering making lashes wet during prep
Routine
Likely causes
- Sensitive eyes
- Fumes
- Eyes not fully closed
- Pad or tape touching the eye
How to identify it
- Lashes become wet during or after prep
- Tears at the outer corners
Corrective action
- Pause and find the cause
- Check eye closure and pad position
- Let the eyes settle and dry the lashes with cool air before continuing
- Stop if stinging persists
Prevention
- Check closure and pad placement before applying any product
PRP-012Sunscreen or skincare migrates onto lashes
Routine
Likely causes
- Products applied near the eyes
How to identify it
- Shiny lashes
- Ask about skincare
Corrective action
- Cleanse thoroughly
- Advise on product placement
Prevention
- Include product placement in aftercare
Cross-references
PRP-013Different prep each time for the same client
Routine
Likely causes
- No written prep routine
- Different artists using different steps
- Rushing on busy days
How to identify it
- Client records show different products or steps each visit
- Retention varies for the same client
Corrective action
- Agree one standard prep routine and use it every time
- Record any deliberate changes
Prevention
- Use a written prep checklist at every station
Cross-references
PRP-014Lashes touched with fingers after prep
Routine
Likely causes
- Habit
- Adjusting tape or pads with fingers
- Checking lashes by touch
How to identify it
- Retention worse in areas touched after prep
- Observe your own hands during a set
Corrective action
- Avoid touching prepped lashes
- If they are touched, cleanse that section again
Prevention
- Use tools rather than fingers to adjust lashes after prep
Cross-references
PRP-015Infill lashes not cleaned before applying new extensions
Routine
Likely causes
- Assuming infill lashes are already clean
- Time pressure
How to identify it
- Retention for new extensions placed at infills is worse than for full sets
- Debris visible at the base
Corrective action
- Cleanse thoroughly at every infill, including around existing extensions, then dry fully
Prevention
- Build full prep time into infill bookings
Cross-references
PRP-016Cleanser has expired or been contaminated
Routine
Likely causes
- Product kept past its use-by date
- Cap left open
- Contamination from dipping brushes
How to identify it
- Check the expiry or opening date
- Look for changes in smell, colour or clarity
Corrective action
- Discard and replace the product
Prevention
- Date products when opened
- Use disposable applicators or pump dispensers
Cross-references
05 Adhesive chemistry and performance
ADH-001Extensions brush off during application
Routine
Likely causes
- Adhesive curing before contact
- Contaminated lashes
- Inadequate attachment
How to identify it
- Check bond appearance, application speed and room conditions
Corrective action
- Adjust to a compatible adhesive speed
- Refresh the glue drop
- Improve attachment contact
Prevention
- Choose an adhesive matched to your speed and the room conditions
ADH-002Adhesive cures too fast (dries on the tweezers or before placement)
Routine
Likely causes
- Adhesive too fast for the artist's speed
- Humidity high for that adhesive
- Drop left out too long
- Air flow across the drop
How to identify it
- Time from dip to placement
- Drop age
- Hygrometer reading against manufacturer range
Corrective action
- Replace the drop as often as the manufacturer recommends
- Select a slower adhesive
- Shield the drop from air currents
Prevention
- Match adhesive speed to your actual placement speed, not your target speed
ADH-003Glue stays wet too long
Routine
Likely causes
- Low humidity
- Slow adhesive
- Excessive product
- Cold conditions
How to identify it
- Check manufacturer specifications and room readings
Corrective action
- Correct conditions or select a suitable adhesive
Prevention
- Monitor temperature and humidity at every appointment
ADH-004White residue on bonds (blooming)
Routine
Likely causes
- Moisture-related curing irregularity
- Excessive product
- Exposure to moisture during curing
How to identify it
- Inspect when it appears, bond quality and conditions
Corrective action
- Correct moisture exposure and adhesive technique
Prevention
- Ensure lashes are fully dry
- Use the minimum effective adhesive
ADH-005Glue becomes thick or stringy
Routine
Likely causes
- Age
- Moisture exposure
- Contamination
- Storage degradation
How to identify it
- Check opening date, appearance and dispensing behaviour
Corrective action
- Discard compromised adhesive
Prevention
- Date every bottle when opened and store as directed
ADH-006Adhesive travels up the natural lash
Routine
Likely causes
- Too much adhesive
- Dipping too deep
- Slow cure
- Wet lashes
How to identify it
- Shiny adhesive line extending past the bond area
Corrective action
- Dip shallower and more quickly
- Wipe excess on the drop edge
- Check lashes are dry
Prevention
- Practise consistent dip depth
ADH-007Fans close after dipping
Routine
Likely causes
- Dipping too deep or too slowly
- Adhesive viscosity
- Drawing the fan out at the wrong angle
How to identify it
- Watch fans as they leave the drop
- Test with a fresh drop
Corrective action
- Use a quick, shallow dip and pull out at a consistent angle
- Match adhesive viscosity to volume work
Prevention
- Practise dip technique on a training head
Cross-references
ADH-008Adhesive forms balls or bulbs at the base
Routine
Likely causes
- Too much adhesive picked up
- Placement not smoothed
- Slow wrap
How to identify it
- Inspect bonds under magnification for raised beads
Corrective action
- Reduce pickup
- Smooth the bond along the contact length
Prevention
- Calibrate dip depth for classic and volume separately
ADH-009Different bottles of the same adhesive behave differently
Routine
Likely causes
- Batch variation
- Storage or transport conditions
- Opened at different times
How to identify it
- Compare batch numbers and opening dates
- Test side by side in the same conditions
Corrective action
- Contact the supplier with batch details
- Set the affected bottle aside
Prevention
- Record batch numbers and dates opened
ADH-010Adhesive colour or performance is uneven within a bottle
Routine
Likely causes
- Pigment settling
- Not shaken before dispensing
How to identify it
- Greyish or streaky bonds
- Inconsistent cure
Corrective action
- Shake the bottle as the manufacturer directs before every dispense
Prevention
- Make shaking part of your setup routine
Cross-references
ADH-011Not enough adhesive picked up
Routine
Likely causes
- Dip too shallow or too quick
- Drop too small or skinned over
- Fan base not reaching the adhesive
How to identify it
- Bonds look dry or thin
- Extensions slide or pop off soon after placement
Corrective action
- Refresh the drop
- Dip to a consistent depth so the base is fully coated
- Check the bond covers the contact area
Prevention
- Practise dip depth on a training head
- Refresh drops on a timer
Cross-references
ADH-012Glue drop dispensed onto an unsuitable surface
Routine
Likely causes
- Dispensing onto a surface the manufacturer doesn't recommend
- Dirty or reused surface
How to identify it
- Drop spreads, beads or skins over unusually fast
Corrective action
- Use a clean surface of the type the manufacturer recommends
Prevention
- Follow the manufacturer's dispensing guidance
- Use a fresh surface every appointment
ADH-013Glue drop not refreshed often enough
Routine
Likely causes
- Working from one drop for too long
- Forgetting during a busy set
How to identify it
- Bonds get weaker and stringier as the appointment goes on
- Drop skins over
Corrective action
- Replace the drop as often as the manufacturer recommends, more often in warm or humid conditions
Prevention
- Set a timer for drop changes
- Note the interval on the station checklist
ADH-014Adhesive has separated in the bottle
Routine
Likely causes
- Bottle not shaken
- Long periods unused
- Ageing adhesive
How to identify it
- Visible layers or streaks in the bottle
- Inconsistent colour or curing
Corrective action
- Shake as directed until fully mixed
- Discard if it won't mix or performance stays poor
Prevention
- Shake before every dispense
- Buy bottle sizes you will use within the opened shelf life
Cross-references
ADH-015Adhesive smells stronger than usual
Routine
Likely causes
- Poor ventilation
- Drop left uncovered
- Working close to the drop
- Room too warm
How to identify it
- Artist or client notices a stronger smell
- Eyes sting or water
Corrective action
- Improve airflow away from the client
- Refresh the drop
- Move the drop further from the client's face
- Stop if the client's eyes sting
Prevention
- Check ventilation as part of room setup
- Follow the adhesive's safety data sheet
Cross-references
ADH-016Adhesive is not suited to the technique
Routine
Likely causes
- Using a classic adhesive for volume, or a thick adhesive for fine fans
How to identify it
- Fans close or bases become bulky
- Bonds weak or slow
Corrective action
- Choose an adhesive the manufacturer describes as suited to your technique and speed
Prevention
- Check the technique recommendations before buying a new adhesive
Cross-references
ADH-017Bond detaches cleanly at the base
Routine
Likely causes
- Contamination on the natural lash
- Short contact length
- Adhesive cured before contact
How to identify it
- Fallen extensions have a smooth adhesive base with no lash and no imprint
Corrective action
- Review prep and drying
- Increase contact length
- Place sooner after dipping
Prevention
- Inspect fallen extensions before changing products
ADH-018Bond feels rough or textured
Routine
Likely causes
- Adhesive starting to cure during placement
- Slow placement
- Drop too old
How to identify it
- Bonds look lumpy or textured under magnification
Corrective action
- Place more quickly after dipping, refresh the drop or choose a slower adhesive
Prevention
- Match adhesive speed to your actual placement speed
ADH-019Adhesive works well in the morning but not later in the day
Routine
Likely causes
- Humidity or temperature changing through the day
- Heating or cooling cycling
- Drop age
How to identify it
- Compare hygrometer readings and retention by time of day
Corrective action
- Adjust room controls through the day
- Refresh drops more often in the afternoon
Prevention
- Record room readings at the start and end of each appointment
Cross-references
ADH-020Changing adhesive brand without testing
Routine
Likely causes
- Seeking a fix
How to identify it
- Retention changes after the switch
Corrective action
- Test new adhesives under controlled conditions first
Prevention
- Change one variable at a time
Cross-references
ADH-021Adhesive on tweezers transfers to other lashes
Routine
Likely causes
- Adhesive building up on tweezer tips during the set
How to identify it
- Stickies and bridging appear partway through the set
- Residue visible on tips
Corrective action
- Clean tweezer tips regularly during the set as your training directs
Prevention
- Keep a clean wipe at the station and clean tips at set intervals
Cross-references
ADH-022Adhesive takes too long to set for a slow beginner
Routine
Likely causes
- Adhesive speed too fast or slow for skill level
How to identify it
- Compare speed to placement time
Corrective action
- Choose an adhesive matched to the artist's current skill
Prevention
- Reassess as skills develop
Cross-references
ADH-023Glue drop placed too close to the client
Routine
Likely causes
- Station set up with the drop near the client's face
How to identify it
- Client's eyes sting or water
- Strong fumes near the face
Corrective action
- Move the drop further from the client and away from airflow toward their face
Prevention
- Set the drop position as part of your station layout
Cross-references
ADH-024Adhesive appears cloudy on the bond
Routine
Likely causes
- Moisture on the lashes at contact
- Too much adhesive
- Humidity outside the adhesive's range
How to identify it
- Bonds look milky or cloudy once cured
Corrective action
- Dry lashes fully
- Reduce adhesive pickup
- Check room readings against the manufacturer's range
Prevention
- Make thorough drying part of the prep routine
Cross-references
06 Environmental conditions
ENV-001Room humidity is outside the adhesive's working range
Routine
Likely causes
- Seasonal change
- Heat pump or air conditioning
- Weather
How to identify it
- Compare the hygrometer reading with the manufacturer's stated range. There is no universal ideal range
Corrective action
- Use a humidifier or dehumidifier
- Choose an adhesive designed for your typical conditions
Prevention
- Record humidity and temperature on every client card
Cross-references
Source: Manufacturer technical data sheets
ENV-002Temperature fluctuates during appointments
Routine
Likely causes
- Heating or cooling cycling on and off
- Sun through windows
- Doors opening
How to identify it
- Take readings at the start and end of appointments
Corrective action
- Stabilise the room before clients arrive
- Move the station away from heat sources and direct sun
Prevention
- Pre-set the room at the start of the day
ENV-003Air currents across the work station
Routine
Likely causes
- Fans
- Heat pump vents
- Open doors and windows
How to identify it
- Drop skins over quickly
- Fumes drift toward the client
Corrective action
- Reposition the station or redirect air flow
Prevention
- Check air flow when setting up a new room
ENV-004Hygrometer readings are inaccurate
Routine
Likely causes
- Cheap or ageing device
- Poor placement
How to identify it
- Compare two devices placed side by side at the station
Corrective action
- Replace or calibrate
- Place at working height near the station
Prevention
- Check accuracy periodically
Cross-references
ENV-005Poor ventilation and fume build-up
Caution
Likely causes
- Small or enclosed room
- Several services at once
How to identify it
- Artist or client eyes sting or water
- Noticeable odour
Corrective action
- Improve ventilation
- Follow the safety data sheet guidance for the adhesive
Prevention
- Review workplace health and safety controls for your adhesive
ENV-006Retention changes with the seasons
Routine
Likely causes
- Humidity and temperature shift
- Seasonal shedding
- Lifestyle changes (heat, swimming)
How to identify it
- Compare retention records by month
Corrective action
- Adjust adhesive or room controls seasonally
Prevention
- Keep records so seasonal patterns are visible
ENV-007Humidifier set incorrectly
Routine
Likely causes
- Humidifier set by habit rather than by reading
- Reading taken far from the station
How to identify it
- Hygrometer at the station reads outside the adhesive's working range
Corrective action
- Adjust the humidifier using a reading taken at working height near the station
Prevention
- Check the reading before every appointment
Cross-references
ENV-008Dehumidifier making the room too dry
Routine
Likely causes
- Dehumidifier left running
- Room smaller than the unit is designed for
How to identify it
- Very low readings
- Adhesive cures slowly
Corrective action
- Reduce or switch off the dehumidifier and recheck
Prevention
- Monitor readings rather than running equipment on a fixed setting
Cross-references
ENV-009Direct sunlight on the work station
Routine
Likely causes
- Station beside a window
- Sun moving across the room
How to identify it
- Station warms up during the day
- Glare
- Adhesive behaves differently
Corrective action
- Close blinds or move the station out of direct sun
Prevention
- Consider the sun's path when choosing station placement
Cross-references
ENV-010Conditions differ between treatment rooms
Routine
Likely causes
- Different room size, heating, airflow or windows
How to identify it
- Readings and retention differ between rooms
Corrective action
- Measure each room and adjust controls, or match adhesive to each room
Prevention
- Keep a hygrometer in every treatment room
Cross-references
ENV-011Weather changes affect retention
Routine
Likely causes
- Rainy, humid weather or dry, cold spells changing indoor conditions
How to identify it
- Retention changes follow the weather
- Readings shift
Corrective action
- Adjust humidifiers, dehumidifiers and heating to keep conditions steady
Prevention
- Record readings daily so patterns are visible
Cross-references
ENV-012Room temperature too cold
Routine
Likely causes
- Heating off before opening
- Winter mornings
- Air conditioning too cold
How to identify it
- Low temperature readings
- Slow curing
- Client feels cold
Corrective action
- Warm the room before clients arrive
- Offer a blanket
Prevention
- Set heating to come on before opening
ENV-013Room temperature too hot
Routine
Likely causes
- Summer heat
- Heating too high
- Small enclosed room
How to identify it
- High readings
- Adhesive cures fast
- Client uncomfortable
Corrective action
- Cool the room
- Refresh drops more often
- Consider a slower adhesive in summer
Prevention
- Monitor temperature seasonally
ENV-014Mobile or home studio with changing conditions
Routine
Likely causes
- Working in different homes or venues
How to identify it
- Results vary by location
Corrective action
- Carry a hygrometer, check conditions on arrival and adjust adhesive choice or drop refresh frequency
Prevention
- Keep adhesives for different conditions in your mobile kit, stored as directed
Cross-references
ENV-015Lighting too dim or uneven
Routine
Likely causes
- Weak or ageing lamp
- Shadows from your hands or head
How to identify it
- Eye strain
- Missed stickies
- Difficulty seeing the base
Corrective action
- Upgrade or reposition lighting to give even light without shadows
Prevention
- Review lighting when you notice strain or rising sticky counts
Cross-references
07 Adhesive storage and product integrity
STO-001Adhesive used past its opened shelf life
Routine
Likely causes
- No opening date recorded
- Bottle used slowly
How to identify it
- Check the date on the bottle against the manufacturer's guidance
Corrective action
- Discard and replace
Prevention
- Write the opening date on every bottle
- Buy sizes that match your usage
Cross-references
STO-002Condensation or temperature shock after cold storage
Routine
Likely causes
- Opening a bottle before it reaches room temperature
How to identify it
- Performance changes after taking the bottle from the fridge
Corrective action
- Allow the bottle to reach room temperature before opening, where the manufacturer recommends refrigeration
Prevention
- Follow the manufacturer's storage instructions exactly
Cross-references
STO-003Nozzle is blocked
Routine
Likely causes
- Adhesive curing at the tip
- Cap not wiped
How to identify it
- Difficult or uneven dispensing
Corrective action
- Wipe the nozzle with a lint-free wipe after each use
- Replace the cap tightly
- Don't enlarge the opening
Prevention
- Clean the nozzle as part of every dispense
Cross-references
STO-004Adhesive damaged in transport or on delivery
Routine
Likely causes
- Heat exposure in vans or letterboxes
- Long transit
How to identify it
- New bottle underperforms straight away
Corrective action
- Contact the supplier
- Set the bottle aside
Prevention
- Request suitable shipping
- Collect deliveries promptly
Cross-references
STO-005Poor sealing or storage near moisture
Routine
Likely causes
- Cap left loose
- Stored in a humid area
How to identify it
- Thickening adhesive
- Crust around the nozzle
Corrective action
- Seal tightly
- Store as directed, often with a moisture absorber
Prevention
- Use a dedicated storage container
Cross-references
STO-006Unopened adhesive stored past its expiry date
Routine
Likely causes
- Overstocking
- Buying in bulk to save money
How to identify it
- Expiry date on the bottle has passed
Corrective action
- Discard expired stock
Prevention
- Rotate stock so the oldest is used first
- Order in quantities you'll use in time
Cross-references
STO-007Adhesive left uncapped during the appointment
Routine
Likely causes
- Leaving the cap off between dispenses
How to identify it
- Adhesive thickens faster
- Crust around the nozzle
Corrective action
- Recap immediately after every dispense
Prevention
- Make capping part of the dispense routine
Cross-references
STO-008Adhesive stored in a hot car or kit bag
Routine
Likely causes
- Mobile kits left in cars or bags in the heat
How to identify it
- New or opened bottles underperform after transport
Corrective action
- Store adhesive as the manufacturer directs and replace bottles exposed to heat
Prevention
- Use an insulated container and never leave kits in a parked car
Cross-references
STO-009Several bottles open at once
Routine
Likely causes
- Opening a new bottle before finishing the last
- Several artists each opening their own
How to identify it
- Bottles reach their opened shelf life before they're used
Corrective action
- Use one bottle at a time per artist
Prevention
- Open bottles only as needed
Cross-references
STO-010Batch number not recorded
Routine
Likely causes
- No stock log
How to identify it
- You can't trace which batch was used when a problem started
Corrective action
- Record batch numbers and opening dates for adhesive and prep products
Prevention
- Keep a simple stock log at each station
Cross-references
STO-011Counterfeit or grey-market product
Routine
Likely causes
- Buying from unauthorised sellers or marketplaces
How to identify it
- Packaging, labels or performance differ from usual
Corrective action
- Stop using it and buy from the manufacturer or an authorised distributor
Prevention
- Check supplier credentials before ordering
Cross-references
STO-012Lash trays stored in direct light or heat
Routine
Likely causes
- Trays left on a sunny bench or near a heater
- Stored open
How to identify it
- Curl relaxes or looks uneven
- Colour fades
- Lashes from older trays behave differently
Corrective action
- Replace trays that have changed shape or colour
- Move storage away from heat and light
Prevention
- Store trays closed in a drawer or box at room temperature
- Use older trays first
Cross-references
STO-013Remover or primer stored incorrectly
Routine
Likely causes
- Products not stored as directed
How to identify it
- Performance changes
Corrective action
- Store each product as the manufacturer directs
Prevention
- Read storage instructions for every new product
Cross-references
STO-014Products shared between artists without tracking
Routine
Likely causes
- Several artists using the same bottles
- No labels or log
How to identify it
- Nobody knows when a product was opened or which batch it came from
Corrective action
- Label each shared product with its opening date and batch
- Discard anything you can't date
Prevention
- Keep a shared stock log
- Give each artist their own adhesive where practical
Cross-references
08 Isolation and separation
ISO-001Multiple natural lashes stuck together (stickies)
Caution
Likely causes
- Poor isolation
- Adhesive spread
- Releasing isolation too early
How to identify it
- Separate and inspect each layer with a tweezer before the client leaves
Corrective action
- Separate while adhesive is still uncured
- If cured, remove the affected extension safely rather than pulling the lashes apart
Prevention
- Hold isolation until the bond sets
- Finish with a structured sticky check
ISO-002Baby lashes or new growth caught in a bond
Routine
Likely causes
- Poor visibility
- Isolating at the tips rather than the base
How to identify it
- Check the base of each bond for short lashes
Corrective action
- Separate or remove
- Avoid applying to very short new growth
Prevention
- Isolate close to the base under good lighting
Cross-references
ISO-003Lower lashes attached to upper lashes
Caution
Likely causes
- Pads or tape not securing lower lashes
- Adhesive drip
How to identify it
- Client cannot open the eye freely
- Lashes pull
Corrective action
- Separate safely before the client opens their eyes
Prevention
- Check lower lashes are fully secured before starting
Cross-references
ISO-004Adhesive bridges between neighbouring lashes
Routine
Likely causes
- Too much adhesive
- Brushing past neighbouring lashes
How to identify it
- Inspect with a tweezer sweep across the lash line
Corrective action
- Separate before curing
- Reduce adhesive
Prevention
- Use less adhesive and a cleaner approach path
Cross-references
ISO-005Isolation released too early
Routine
Likely causes
- Rushing
- Poor hand positioning
- Tiredness
How to identify it
- Stickies appear just after placement
Corrective action
- Hold isolation for a count until the bond sets
Prevention
- Practise holding isolation
- Review adhesive speed
Cross-references
ISO-006Stickies between top and bottom layers
Routine
Likely causes
- Not checking lower layers
- Placing through multiple layers
How to identify it
- Check each layer from above and below
Corrective action
- Separate and re-isolate layer by layer
Prevention
- Work layer by layer in a consistent order
Cross-references
ISO-007Final sticky check skipped or rushed
Caution
Likely causes
- Running late
- Habit
How to identify it
- Stickies found at the infill
Corrective action
- Always finish with a full check from inner to outer corner
Prevention
- Build check time into the appointment length
Cross-references
ISO-008Isolation tweezer slips
Routine
Likely causes
- Worn or misaligned tips
- Adhesive on tips
- Damaged tweezers
How to identify it
- Tweezer slips off the lash
- Isolation won't hold
Corrective action
- Clean the tips
- Repair or replace damaged tweezers
Prevention
- Store tweezers with tip covers and check alignment regularly
Cross-references
ISO-009Can't see the base of the lash clearly
Routine
Likely causes
- Poor lighting
- Magnification too weak
- Working angle
- Client's head position
How to identify it
- Missed lashes and stickies at the base
Corrective action
- Adjust lighting, magnification and your position
- Reposition the client's head
Prevention
- Review your setup when sticky counts rise
Cross-references
ISO-010Isolating too many lashes at once
Routine
Likely causes
- Isolating clusters to save time
- Poor visibility
- Rushing
How to identify it
- Two or more natural lashes bonded into one extension
- Lashes pulling as they grow
Corrective action
- Separate while the adhesive is uncured or remove the affected extension
- Isolate one natural lash at a time
Prevention
- Practise single-lash isolation
- Check every placement before moving on
Cross-references
ISO-011Isolation creates a gap that is too wide
Routine
Likely causes
- Opening the isolation too wide
How to identify it
- Neighbouring lashes disturbed
- Takes longer to place
Corrective action
- Use a narrow isolation just wide enough to place the extension
Prevention
- Practise controlled isolation
Cross-references
ISO-012Lashes spring back into the bond
Routine
Likely causes
- Releasing isolation before the bond sets
How to identify it
- Neighbouring lashes stick to fresh bonds
Corrective action
- Hold isolation for a moment after placement
Prevention
- Match adhesive speed to your placement speed
Cross-references
ISO-013Stickies in the inner corner
Routine
Likely causes
- Short, fine lashes
- Awkward angle
- Tears or oils in the inner corner
How to identify it
- Stickies concentrated in inner corners
Corrective action
- Separate carefully
- Improve your positioning
- Work inner corners with fresh adhesive
Prevention
- Check inner corners at the end of every set
Cross-references
ISO-014Stickies caused by brushing during the set
Routine
Likely causes
- Brushing through before bonds have set
How to identify it
- Stickies appear after brushing
Corrective action
- Wait until bonds have set before brushing
- Separate any new stickies
Prevention
- Brush at set points only
Cross-references
ISO-015Stickies found by the client at home
Caution
Likely causes
- Missed at the final check
How to identify it
- Client reports discomfort or lashes pulling
Corrective action
- Book a correction
- Don't advise the client to pull them apart
Prevention
- Do a full sticky check
ISO-016Difficulty isolating very fine lashes
Routine
Likely causes
- Very fine natural lashes
How to identify it
- Slow isolation
- Lashes are hard to grip
Corrective action
- Use fine-tipped tweezers and good magnification
Prevention
- Practise on fine-lashed training models
Cross-references
ISO-017Isolation hand tiring
Routine
Likely causes
- Holding isolation with tension
- Poor posture
How to identify it
- Fatigue or cramp in the isolation hand
Corrective action
- Adjust your posture and rest your hand
- Take short breaks
Prevention
- Set up the station ergonomically
Cross-references
09 Placement and attachment
PLC-001Extension touching the skin or placed too close to the eyelid
Caution
Likely causes
- Attachment too close to the base
- Incorrect angle
How to identify it
- Client reports poking or itching
- Visible skin contact under magnification
Corrective action
- Remove and replace with a small, consistent gap from the skin (follow your training standard)
Prevention
- Check the gap at every placement
PLC-002Contact length between extension and natural lash is too short
Routine
Likely causes
- Bonding only at the base of the extension
- Rushed placement
How to identify it
- Extension pivots or flicks off easily
- Bond sits on a small spot
Corrective action
- Lay the extension along a sufficient length of the natural lash
Prevention
- Practise contact length on a training head
PLC-003Floating base (gap between extension and natural lash)
Routine
Likely causes
- Wrong curl for the natural lash
- Poor placement angle
How to identify it
- View from the side
- Check contact along the base
Corrective action
- Choose a curl that matches
- Place flush along the lash
Prevention
- Match curl to natural lash shape
PLC-004Extensions twist after several days
Routine
Likely causes
- Poor alignment
- Oversized fan
- Unstable attachment
- Natural lash growth
How to identify it
- Inspect base contact and natural lash strength
Corrective action
- Adjust extension selection and attachment
Prevention
- Align the extension centrally on the natural lash
PLC-005Bond placed too far up the natural lash
Routine
Likely causes
- Poor visibility at the base
- Avoiding skin contact too cautiously
How to identify it
- Extensions droop or grow out quickly
Corrective action
- Place closer to the base while keeping a small gap
Prevention
- Improve lighting and positioning
PLC-006Extensions point away from the mapped direction
Routine
Likely causes
- Attaching at the wrong angle
- Ignoring natural growth
How to identify it
- View from above and from the side
Corrective action
- Correct the attachment angle
- Place on the side of the lash that achieves direction
Prevention
- Map direction before starting
PLC-007Client feels lashes poking
Caution
Likely causes
- Skin contact
- Lifting base
- Incorrect direction
- Outgrowth
How to identify it
- Inspect the attachment under magnification
Corrective action
- Safely remove and replace the offending extension
Prevention
- Final check for skin contact and direction
PLC-008Extension attached on top of the natural lash instead of the side or underneath
Routine
Likely causes
- Inconsistent attachment method
- Poor visibility
How to identify it
- Extensions sit high or point upward unevenly
Corrective action
- Choose a consistent attachment position that gives the intended direction
Prevention
- Practise attachment positions on a training head
PLC-009Base of the extension is angled away from the natural lash
Routine
Likely causes
- Tweezer angle at placement
- Rushing
How to identify it
- Gap between base and lash viewed from the side
Corrective action
- Re-place with the base aligned along the lash
Prevention
- Check alignment as you place
PLC-010Extension placed on the tip half of the natural lash
Routine
Likely causes
- Isolating at the tip
- Poor visibility at the base
- Avoiding the lid too cautiously
How to identify it
- Extensions droop and grow out quickly
- Bond sits far up the lash
Corrective action
- Place close to the base while keeping a small, consistent gap from the lid
Prevention
- Isolate near the base under good lighting
Cross-references
PLC-011Bond position inconsistent across the lash line
Routine
Likely causes
- Changing hand position through the set
How to identify it
- Uneven appearance and outgrowth
Corrective action
- Work to a consistent distance from the lid
Prevention
- Check distance regularly through the set
PLC-012Extensions placed on a natural lash already carrying one
Routine
Likely causes
- Losing track of covered lashes
- Working out of sequence
How to identify it
- Two extensions on one natural lash
- Heavy spots that droop
Corrective action
- Remove the extra extension safely
Prevention
- Work in a fixed sequence and check coverage as you go
PLC-013Extension longer than suitable for the natural lash
Routine
Likely causes
- Map too ambitious
- Lash too short
How to identify it
- Extension droops or twists
Corrective action
- Choose a length in proportion to the natural lash
Prevention
- Measure natural lash length when mapping
PLC-014Extension pushed into place rather than laid on
Routine
Likely causes
- Pressing the extension onto the lash instead of laying it along it
How to identify it
- Natural lash bends, displaces or is pushed out of line
- Bonds look flattened
Corrective action
- Lay the extension along the lash with light, even contact and let the adhesive do the work
Prevention
- Practise placement pressure on a training head
PLC-015Extension sits under the lower lashes or hidden from view
Routine
Likely causes
- Placement too low
How to identify it
- Missing coverage when the eye is open
Corrective action
- Check placement with the eye open at the end
Prevention
- Check from the client's sitting position
Cross-references
PLC-016Bond too close to the lid causing itching after the appointment
Caution
Likely causes
- Placement too close
How to identify it
- Client reports itching or irritation
Corrective action
- Inspect and replace any extension touching the skin
Prevention
- Check distance at every placement
PLC-017Extensions not aligned with neighbouring extensions
Routine
Likely causes
- Inconsistent attachment angle
- Not brushing through during the set
How to identify it
- Choppy appearance when brushed
Corrective action
- Correct the direction of misaligned extensions
Prevention
- Brush through at set points to check direction as you work
Cross-references
PLC-018Extension attached to a lash that's about to shed
Routine
Likely causes
- Placing extensions on mature lashes near the end of their cycle
How to identify it
- Early loss with a root bulb attached
Corrective action
- Avoid placing on lashes that are loose or very mature
Prevention
- Understand and explain the natural growth cycle
Cross-references
10 Classic lash application
CLS-001Extension too heavy for the natural lash
Caution
Likely causes
- Diameter or length out of proportion with the natural lash
How to identify it
- Natural lash droops
- Breakage
- Client reports heaviness
Corrective action
- Choose diameter and length in proportion to the natural lash's strength
Prevention
- Assess natural lash strength zone by zone before mapping
CLS-002Uneven coverage or visible gaps
Routine
Likely causes
- Skipping lashes
- Working out of sequence
- Poor visibility
How to identify it
- Gaps visible when brushed or viewed from several angles
Corrective action
- Fill gaps systematically zone by zone
Prevention
- Work in a consistent sequence and check coverage at the end
CLS-003Inconsistent lengths or curl transitions
Routine
Likely causes
- No written map
- Tray mix-ups
How to identify it
- Steps or jumps in the lash line
Corrective action
- Correct transitions gradually by blending lengths
Prevention
- Write the map and lay out trays in map order
CLS-004Excess adhesive or beaded bonds
Routine
Likely causes
- Over-dipping
- Slow placement
- Thick adhesive
How to identify it
- Visible beads or bulbs at the base under magnification
- Heavier-looking bonds
Corrective action
- Reduce dip depth
- Wipe excess on the edge of the drop
- Smooth the bond along the contact length as you place
Prevention
- Calibrate dip depth for classic separately from volume
CLS-005One eye looks fuller than the other
Routine
Likely causes
- Different natural density between the eyes
- Uneven coverage
- Mapping inconsistency
How to identify it
- Count lashes per zone on each eye
- Compare both eyes with the client sitting up
Corrective action
- Balance the design individually, adding fullness with length or curl where density is lower rather than overloading lashes
Prevention
- Map and record each eye separately
- Check symmetry before finishing
CLS-006Curl doesn't suit the client's lifted lashes
Routine
Likely causes
- Previous lash lift changing the natural curl
How to identify it
- Extension bases don't sit flush on lifted lashes
Corrective action
- Choose a curl that matches the lifted shape
Prevention
- Ask about lifts at consultation
CLS-007Classic set looks sparse
Routine
Likely causes
- Low natural density
- Fine lashes
- Client expecting a fuller look
How to identify it
- Coverage is complete but the set still looks thin
Corrective action
- Explain what classic can achieve on their lashes
- Suggest hybrid or light volume if the natural lashes can support it
Prevention
- Set density expectations at consultation using photos of similar natural lashes
CLS-008Diameter too thin to show on coarse lashes
Routine
Likely causes
- Diameter too fine for coarse natural lashes
How to identify it
- Set looks underwhelming or barely visible
Corrective action
- Choose a diameter that suits the natural lash while staying within a safe weight
Prevention
- Record natural lash diameter
Cross-references
CLS-009Classic extensions twisting
Routine
Likely causes
- Poor contact length
- Base not aligned
- Curl mismatch
How to identify it
- Extensions twist after a few days
Corrective action
- Improve contact length and alignment
- Match curl to the natural lash
Prevention
- Check contact from the side as you place
Cross-references
CLS-010Inner corners too long
Routine
Likely causes
- Inner corners mapped too long
- Extensions angled toward the eye
How to identify it
- Client feels poking or scratching at the inner corner
- Extensions touch the skin when the eye closes
Corrective action
- Replace with shorter, softer extensions angled away from the eye
Prevention
- Map inner corners shorter and check them with the eye open and closed
Cross-references
CLS-011Lengths step too sharply between zones
Routine
Likely causes
- Map with large length jumps between zones
- Tray mix-ups
How to identify it
- Obvious steps in the lash line when the eye is open
Corrective action
- Add intermediate lengths to blend the transition
Prevention
- Plan gradual steps on the map and lay out trays in order
Cross-references
CLS-012Not all natural lashes covered
Routine
Likely causes
- Missed lashes
- Limited visibility
- Working out of order
How to identify it
- Gaps or bare natural lashes when brushed through at the end
Corrective action
- Fill systematically zone by zone
- Check each layer from above and below
Prevention
- Work in a consistent sequence and do a coverage check before the final brush-through
Cross-references
CLS-013Extensions placed at different heights on the lash
Routine
Likely causes
- Changing hand position or distance from the lid during the set
How to identify it
- Uneven top line and outgrowth at different rates
Corrective action
- Re-place extensions so the distance from the lid is consistent
Prevention
- Check distance at regular points through the set
Cross-references
CLS-014Mixed curls create messy direction
Routine
Likely causes
- Too many curl types in one set
- Transitions not planned
How to identify it
- Lashes point in different directions when brushed
Corrective action
- Simplify the curl selection and blend transitions gradually
Prevention
- Plan curl choices in the map before starting
Cross-references
CLS-015Colour of extensions looks harsh
Routine
Likely causes
- Jet black extensions on very fair natural lashes or skin
How to identify it
- Client finds the result harsh or heavy-looking
Corrective action
- Offer softer colours such as brown or mixed tones at the next visit
Prevention
- Discuss colour at consultation and show examples
Cross-references
CLS-016Set takes too long
Routine
Likely causes
- Slow isolation
- Disorganised station
- Backtracking
- Perfectionism
How to identify it
- Set times regularly exceed the booked time
Corrective action
- Time each stage of a set to see where time goes
- Improve the slowest step first
Prevention
- Practise isolation and placement drills
- Standardise your station
Cross-references
11 Volume fan creation and application
VOL-001Fans close or collapse when dipped
Routine
Likely causes
- Dipping too deep or slowly
- Thin adhesive
- Fan not set before dipping
How to identify it
- Watch the fan as it leaves the drop
Corrective action
- Use a quick, shallow dip
- Check the fan's base is secure first
Prevention
- Practise dipping technique
Cross-references
VOL-002Fan bases are thick or chunky
Routine
Likely causes
- Too many extensions in one fan
- Uneven base
- Too much adhesive
How to identify it
- Bulky or wide bases under magnification
- Set looks heavy at the lash line
Corrective action
- Build tighter, narrower bases
- Reduce adhesive pickup
- Check fan weight suits the natural lash
Prevention
- Practise base formation drills
- Inspect fans before dipping
VOL-003Fan too heavy for the natural lash
Caution
Likely causes
- Too many extensions or too thick a diameter for the natural lash
How to identify it
- Natural lash droops under the fan
- Breakage at infills
Corrective action
- Reduce the number of extensions per fan or the diameter
Prevention
- Match fan weight to natural lash strength zone by zone
VOL-004Fans are asymmetric or have uneven legs
Routine
Likely causes
- Uneven pickup
- Inconsistent spreading technique
How to identify it
- Fans lopsided with uneven legs when compared against a guide
Corrective action
- Rebuild the fan
- Spread legs evenly from a centred base
Prevention
- Practise fan symmetry drills with a guide
Cross-references
VOL-005Fan not wrapped securely around the natural lash
Routine
Likely causes
- Base too narrow or placed off-centre
How to identify it
- Fan slides, twists or sits to one side of the lash
Corrective action
- Wrap the base around the natural lash so it's centred and secure
Prevention
- Practise wrapping on training lashes
Cross-references
VOL-006Premade fans behave differently from handmade fans
Routine
Likely causes
- Bonded base thickness
- Weight
- Inconsistent manufacture
How to identify it
- Compare base thickness and weight
Corrective action
- Choose lighter or better-made premade fans
- Adjust technique
Prevention
- Test new premade fans before using them on clients
Cross-references
VOL-007Fans lose their spread after a few days
Routine
Likely causes
- Water exposure
- Incorrect brushing
- Humidity
- Unstable base
How to identify it
- Fans look closed or stuck together at the infill
Corrective action
- Improve base stability and explain gentle brushing and drying
Prevention
- Teach correct brushing and patting dry after cleansing
Cross-references
VOL-008Fans too wide for the space
Routine
Likely causes
- Overspreading fans for the space available
How to identify it
- Fans overlap neighbours and look messy
Corrective action
- Make narrower fans to suit the spacing between natural lashes
Prevention
- Match fan width to natural lash spacing in each zone
Cross-references
VOL-009Fans too narrow, looking like classic
Routine
Likely causes
- Underspreading
- Fans not opened before dipping
How to identify it
- Volume set looks like classic
Corrective action
- Open fans evenly before dipping and keep them open as you place
Prevention
- Practise fan drills and check spread before dipping
Cross-references
VOL-010Fan base too long
Routine
Likely causes
- Picking up extensions too far from the base
How to identify it
- Long, bulky bases that sit away from the lash
Corrective action
- Pick up closer to the base so it stays short and neat
Prevention
- Practise pickup position
Cross-references
VOL-011Fans picked up unevenly from the strip
Routine
Likely causes
- Uneven pickup from the strip
- Tweezer angle
How to identify it
- Fans with uneven legs or misaligned bases
Corrective action
- Pick up evenly with the tweezer square to the strip
Prevention
- Practise pickup technique
Cross-references
VOL-012Lash strip doesn't release easily
Routine
Likely causes
- Strip adhesive on the tray holds too firmly
- Tray quality
How to identify it
- Fan making slows
- Lashes pull unevenly from the strip
Corrective action
- Try a different tray or brand
Prevention
- Test new trays before using them on clients
Cross-references
VOL-013Fans losing shape after placement
Routine
Likely causes
- Base not secured
- Fan not wrapped
- Adhesive too thin
How to identify it
- Fans close or lose shape after placement
Corrective action
- Wrap the base securely and check the adhesive suits volume work
Prevention
- Practise base and wrapping technique
Cross-references
VOL-014Mega volume used on unsuitable lashes
Routine
Likely causes
- Mega volume chosen for lashes that can't support the weight
How to identify it
- Natural lashes droop
- Breakage
Corrective action
- Reduce fan weight and lengths
Prevention
- Assess natural lash strength before agreeing on a style
Cross-references
VOL-015Hybrid set looks unbalanced
Routine
Likely causes
- Uneven distribution of classic and volume
How to identify it
- Patchy, unbalanced appearance
Corrective action
- Distribute classic and volume evenly across the lash line
Prevention
- Plan the mix on the map
Cross-references
VOL-016Fan wrapping too tight, pinching the lash
Routine
Likely causes
- Wrapping too tightly
How to identify it
- Bond looks pinched
- Natural lash bent at the base
Corrective action
- Wrap with gentler pressure so the fan sits around the lash without squeezing it
Prevention
- Practise wrapping pressure
Cross-references
VOL-017Fans uneven in size across the set
Routine
Likely causes
- Inconsistent fan technique
- Tiredness
How to identify it
- Fans vary in size and spread across the set
Corrective action
- Make fans to a consistent size and check against a guide
Prevention
- Practise fan drills
- Take short breaks
Cross-references
VOL-018Slow fan making
Routine
Likely causes
- Technique
- Unfamiliar tools
How to identify it
- Fan making takes most of the appointment
Corrective action
- Practise fan drills regularly
Prevention
- Time drills to track progress
Cross-references
12 Lash mapping, styling and correction
MAP-001Cat-eye styling makes the eyes look droopy
Routine
Likely causes
- Longest lengths placed too far out
- Outer corners pointing down
How to identify it
- Eyes look droopy when open, especially with the client sitting up
Corrective action
- Move the longest zone inward and lift the outer corners with curl and direction
Prevention
- Assess eye shape and natural lash direction before choosing a cat-eye style
Cross-references
MAP-002Hooded eyes: extensions are hidden or touch the lid
Routine
Likely causes
- Curl too soft
- Lengths not matched to the lid
How to identify it
- Extensions hidden under the lid or touching it when the eyes are open
Corrective action
- Use stronger curls and adjust lengths so the lashes clear the lid
Prevention
- Assess the eyes open and upright before mapping
Cross-references
MAP-003Deep-set eyes look shadowed or overpowered
Routine
Likely causes
- Lengths or curls that don't project from a deep-set eye
How to identify it
- Eyes look shadowed or the lashes disappear when the eye is open
Corrective action
- Adjust curl and length so the lashes project from the brow bone
Prevention
- Assess eye depth at consultation
Cross-references
MAP-004Prominent eyes look exaggerated
Routine
Likely causes
- Too much curl or length for a prominent eye
How to identify it
- Eyes look exaggerated, especially in profile
Corrective action
- Use softer curls and moderate lengths
Prevention
- Check eye shape in profile before mapping
Cross-references
MAP-005Downward-growing lashes aren't corrected
Routine
Likely causes
- Curl too soft
- Attachment angle following the downward growth
How to identify it
- Lashes still point down with the eye open
Corrective action
- Use a stronger curl and attach on the side that lifts the direction
Prevention
- Record growth direction for each zone
Cross-references
MAP-006Set looks heavy or lengths overpower the eye
Routine
Likely causes
- Lengths too long
- Density too high for the eye and lash
How to identify it
- Set looks heavy
- Client feels weight
- Lashes droop
Corrective action
- Reduce lengths and density
Prevention
- Match the style to eye shape and natural lash strength
MAP-007Asymmetry between the two eyes
Routine
Likely causes
- Different eye shapes
- One map used for both eyes
How to identify it
- Eyes look uneven when open
Corrective action
- Map each eye individually
Prevention
- Check symmetry during the set and at the end with the client sitting up
Cross-references
MAP-008Apex placed in the wrong position
Routine
Likely causes
- Apex not aligned with the eye's highest point
How to identify it
- Shape looks off-centre when the eye is open
Corrective action
- Move the apex to the correct position
Prevention
- Mark the map with the client's eyes open
Cross-references
MAP-009Doll eye makes the eyes look too round
Routine
Likely causes
- Length concentrated in the centre of the eye
How to identify it
- Eyes look rounder than the client wants
Corrective action
- Soften the centre lengths or move the apex outward
Prevention
- Discuss the look the client wants before choosing doll or open styles
Cross-references
MAP-010Squirrel style placed too far in
Routine
Likely causes
- Longest zone placed too close to the inner corner
How to identify it
- Look unbalanced
Corrective action
- Move the longest zone outward
Prevention
- Map with the eyes open
Cross-references
MAP-011Lengths too short to show
Routine
Likely causes
- Overly conservative map
- Fear of weight
How to identify it
- Client says the set doesn't show
Corrective action
- Lengthen within safe limits for the natural lash
Prevention
- Measure natural lash length to know what's safe
Cross-references
MAP-012Curl too strong for the eye shape
Routine
Likely causes
- Curl too strong for the eye or brow position
How to identify it
- Lashes touch the brows or glasses
Corrective action
- Choose a softer curl
Prevention
- Ask about glasses and check brow clearance at consultation
Cross-references
MAP-013Lashes touch glasses
Routine
Likely causes
- Length and curl too much for the client's glasses
How to identify it
- Lashes touch the lenses
Corrective action
- Shorten lengths or soften the curl
Prevention
- Ask clients to bring their glasses to the consultation
Cross-references
MAP-014Downturned eyes look more downturned
Routine
Likely causes
- Outer corners not lifted
- Downward growth
How to identify it
- Eyes look more downturned
Corrective action
- Lift the outer corners with curl and direction
Prevention
- Assess eye shape before mapping
Cross-references
MAP-015Close-set eyes look closer
Routine
Likely causes
- Length concentrated toward the inner corner
How to identify it
- Eyes look closer together
Corrective action
- Shift the longest lengths outward
Prevention
- Assess eye spacing at consultation
Cross-references
MAP-016Wide-set eyes look wider
Routine
Likely causes
- Length concentrated toward the outer corner
How to identify it
- Eyes look wider apart
Corrective action
- Shift the longest lengths inward
Prevention
- Assess eye spacing at consultation
Cross-references
MAP-017Mapping not recorded
Routine
Likely causes
- No record of lengths, curls and diameters used
How to identify it
- Infills don't match the original set
Corrective action
- Record the map after every set
Prevention
- Use client cards or a booking system note
Cross-references
MAP-018Bottom layer and top layer mapped the same
Routine
Likely causes
- Same lengths on top and bottom layers
How to identify it
- Flat look with no texture
Corrective action
- Map top and bottom layers separately
Prevention
- Plan layers in the map
Cross-references
13 Speed, workflow and efficiency
WFL-001Isolation is slow
Routine
Likely causes
- Hand position
- Lighting
- Tweezer choice
- Lack of practice
How to identify it
- Time your isolations
- Isolation takes most of the set time
Corrective action
- Refine hand positioning so the isolating tweezer rests steadily
- Improve lighting and magnification
- Check tweezer tips
Prevention
- Run short daily isolation drills on a training head
WFL-002Excessive tweezer movements or repeated glue dipping
Routine
Likely causes
- Hesitating
- Unclear placement plan
- Adhesive too fast or slow
How to identify it
- Video your hands during a set and count unnecessary movements and re-dips
Corrective action
- Plan each placement before you pick up
- Dip once and place
- Match adhesive speed to your pace
Prevention
- Practise efficient placement sequences
Cross-references
WFL-003Poor station setup
Routine
Likely causes
- Tools out of reach
- Layout changes between appointments
How to identify it
- Frequent reaching, turning or searching for tools
Corrective action
- Standardise the station layout so everything is within reach of your working hand
Prevention
- Use a setup checklist and photo of the correct layout
Cross-references
WFL-004Backtracking or inconsistent working order
Routine
Likely causes
- No fixed working order
How to identify it
- Gaps and repeated passes over the same area
Corrective action
- Adopt one working sequence and use it for every set
Prevention
- Write your sequence on the station checklist
Cross-references
WFL-005Finishing is rushed
Routine
Likely causes
- Running late
- Appointment length too short
How to identify it
- Stickies, messy top lines and missed outer corners
Corrective action
- Protect the last part of the appointment for checking and finishing
Prevention
- Book realistic appointment lengths that include finishing time
Cross-references
WFL-006Inner corners are difficult to reach
Routine
Likely causes
- Your body position
- Client's head angle
How to identify it
- Strain or awkward reach when working inner corners
Corrective action
- Reposition yourself or turn the client's head slightly toward you
Prevention
- Plan inner-corner positioning as part of your sequence
Cross-references
WFL-007Changing tools frequently during a set
Routine
Likely causes
- Disorganised tray
- Tools not laid out in order of use
How to identify it
- Count tool changes during a set
Corrective action
- Organise tools in the order you'll use them
Prevention
- Plan your station setup
Cross-references
WFL-008Running late every appointment
Routine
Likely causes
- Underestimated appointment times
- Late arrivals
- Interruptions
How to identify it
- Running behind every day
Corrective action
- Book realistic times based on your actual set times
Prevention
- Track how long each service really takes for a month
Cross-references
WFL-009Time lost fixing stickies
Routine
Likely causes
- Poor isolation
- Releasing too early
How to identify it
- Count time spent separating stickies
Corrective action
- Improve isolation and hold until the bond sets
Prevention
- Practise isolation drills
Cross-references
WFL-010Inconsistent set times between clients
Routine
Likely causes
- Process varies between clients
How to identify it
- Set times vary widely for similar sets
Corrective action
- Standardise the process from setup to finish
Prevention
- Use checklists
Cross-references
WFL-011Excessive brushing during the set
Routine
Likely causes
- Brushing out of habit or nerves
How to identify it
- Time lost
- Stickies from brushing fresh bonds
Corrective action
- Brush only at planned points in the set
Prevention
- Plan brushing points in your sequence
Cross-references
WFL-012Tray layout doesn't match the map
Routine
Likely causes
- Trays not laid out to match the map
How to identify it
- Wrong lengths placed
- Time spent searching
Corrective action
- Lay out trays in map order before starting
Prevention
- Include tray setup in the station checklist
Cross-references
WFL-013Interruptions during appointments
Routine
Likely causes
- Phone, staff questions or deliveries
How to identify it
- Count interruptions per appointment
Corrective action
- Silence your phone and ask staff to hold non-urgent questions
Prevention
- Agree interruption rules with your team
Cross-references
WFL-014Admin done during appointment time
Routine
Likely causes
- Doing messages or admin between placements
How to identify it
- Running late
- Lost concentration
Corrective action
- Keep admin to separate scheduled time
Prevention
- Block admin time in your diary
Cross-references
WFL-015Not enough time between appointments
Routine
Likely causes
- Back-to-back bookings
How to identify it
- Cleaning and setup rushed between clients
Corrective action
- Add buffer time between appointments
Prevention
- Build buffers into your booking system
Cross-references
WFL-016Prep takes too long
Routine
Likely causes
- Disorganised prep
- Products not ready
How to identify it
- Prep takes much longer than planned
Corrective action
- Have prep products laid out before the client lies down
Prevention
- Use a prep checklist
Cross-references
14 Client positioning, eye closure and comfort
CMF-001Client's eyes water during treatment
Caution
Likely causes
- Incomplete eye closure
- Pad touching the eye
- Fumes
- Individual sensitivity
How to identify it
- Stop and check eye closure and pad position
Corrective action
- Correct the source
- Rest the eyes
- Discontinue if stinging or watering persists
Prevention
- Check closure and pad position before starting
CMF-002Eyelids flutter
Routine
Likely causes
- Anxiety
- Light sensitivity
- Discomfort
How to identify it
- Observe the lids during work
Corrective action
- Reassure the client
- Reduce light
- Place gentle pressure with tape if appropriate
Prevention
- Discuss comfort before starting
CMF-003Eyes don't close fully
Caution
Likely causes
- Natural incomplete closure
- Anxiety
- Tape tension
How to identify it
- Check for a visible gap along the lash line
Corrective action
- Adjust positioning
- Protect the eye
- Postpone if unsafe
Prevention
- Ask about closure and check before starting
CMF-004Eye pad is uncomfortable or touching the eye
Caution
Likely causes
- Pad placed too high
- Wrong size
How to identify it
- Client reports scratching or stinging
Corrective action
- Reposition or replace the pad
Prevention
- Check pad placement with the client before starting
CMF-005Tape pulls or irritates the skin
Routine
Likely causes
- Too much tension
- Sensitive skin
How to identify it
- Redness or discomfort where tape sits
Corrective action
- Use gentler tape
- Reduce tension
Prevention
- Test tape on clients with sensitive skin
Cross-references
CMF-006Neck, back or breathing discomfort lying flat
Caution
Likely causes
- Bed position
- Health conditions
How to identify it
- Ask at booking and during the appointment
Corrective action
- Adjust support and position
- Take planned breaks
Prevention
- Ask comfort questions at booking
CMF-007Client too cold or too hot on the bed
Routine
Likely causes
- Room temperature
- No blanket
How to identify it
- Client says they feel cold or hot
Corrective action
- Adjust the room temperature or offer a blanket
Prevention
- Check comfort before starting
Cross-references
CMF-008Client talks during the appointment
Routine
Likely causes
- Nerves
- Habit
How to identify it
- Eyelids and lashes move when the client talks
Corrective action
- Politely explain that staying still helps
Prevention
- Explain before starting
Cross-references
CMF-009Client opens their eyes during treatment
Caution
Likely causes
- Reflex
- Discomfort
How to identify it
- Client opens their eyes during treatment
Corrective action
- Stop and check the eye
- Remind the client to keep their eyes closed
Prevention
- Explain before starting
Cross-references
CMF-010Client falls asleep and moves
Routine
Likely causes
- Client relaxes and falls asleep
How to identify it
- Head rolls or turns
- Sudden movement when they wake
Corrective action
- Pause and gently reposition the head
- Move tools away before waking them
Prevention
- Support the head and neck with a pillow
Cross-references
CMF-011Bed height wrong for the artist
Routine
Likely causes
- Bed or chair height not adjusted
How to identify it
- Artist back, neck or shoulder pain
Corrective action
- Adjust bed and chair height so you work with a straight back and relaxed shoulders
Prevention
- Set up the station ergonomically
Cross-references
CMF-012Client needs a break
Routine
Likely causes
- Discomfort
- Bathroom
- Long appointment
How to identify it
- Client asks for a break or fidgets
Corrective action
- Protect the eyes, help the client sit up slowly and take a short break
Prevention
- Offer breaks during long appointments
CMF-013Bright light shining into the client's eyes
Routine
Likely causes
- Lamp angled toward the client's eyes
How to identify it
- Client squints, flutters or waters
Corrective action
- Adjust the lamp so light falls on the lash line, not into the eyes
Prevention
- Plan lighting setup
Cross-references
CMF-014Client sneezes or coughs during the appointment
Routine
Likely causes
- Allergies
- Colds
- Dust
How to identify it
- Client sneezes or coughs during application
Corrective action
- Move tools away immediately
- Pause until the client is settled
Prevention
- Ask clients to reschedule if they're unwell
Cross-references
CMF-015Hand resting on client's face
Routine
Likely causes
- Resting hands on the face for stability
How to identify it
- Client feels pressure on the cheeks or forehead
Corrective action
- Use a lighter touch and rest your hands on a support where possible
Prevention
- Practise stable hand positions
Cross-references
CMF-016Client feels claustrophobic
Routine
Likely causes
- Anxiety lying under a lamp with eyes taped
How to identify it
- Client says they feel closed in or panicky
Corrective action
- Reassure the client, talk them through each step and offer breaks
Prevention
- Discuss comfort before starting
Cross-references
15 Allergic reactions, irritation and complications
SAF-001Chemical (adhesive, remover or primer) in the eye
Urgent / emergency
Likely causes
- Product drip
- Incomplete eye closure
- Client opening their eyes
How to identify it
- Client reports sudden burning, stinging or pain
Corrective action
- Stop immediately
- Irrigate with gently running clean water for at least 15 minutes, keeping the eye open
- Seek urgent medical help if burning or stinging is present
- Do not rub the eye
- Document the incident
Prevention
- Use minimal product near the eye
- Confirm eye closure
- Keep an eyewash procedure ready
Cross-references
Source: Health New Zealand – chemical eye exposure first aid
SAF-002Severe eye pain, vision changes or suspected corneal injury
Urgent / emergency
Likely causes
- Chemical exposure
- Scratch from a tool or pad
How to identify it
- Client reports pain, blurred vision or light sensitivity
Corrective action
- Stop treatment and seek urgent medical help
Prevention
- Keep tools controlled and the eye protected
Cross-references
SAF-003Swollen, itchy eyelids hours to days after treatment
Stop treatment
Likely causes
- Possible allergic reaction to adhesive or another product
How to identify it
- Ask when symptoms started and how they have changed
Corrective action
- Do not diagnose or recommend medication
- Advise the client to see a GP or pharmacist
- Any removal should follow medical advice
- Document
Prevention
- Thorough consultation
- Do not reapply adhesive extensions after a suspected allergic reaction
Cross-references
Source: DermNet NZ – reactions to eyelash extension adhesives
SAF-004Red or bloodshot eyes after the appointment
Caution
Likely causes
- Fume exposure with incomplete closure
- Pad contact
How to identify it
- Ask about pain, discharge or vision changes
Corrective action
- Advise medical review if it worsens, persists, or comes with pain, discharge or vision changes
Prevention
- Confirm full eye closure and correct pad placement
SAF-005Stinging or burning during application
Stop treatment
Likely causes
- Fumes reaching an eye that isn't fully closed
- Product on the skin or eye
- Pad or tape touching the eye
How to identify it
- Client reports stinging or burning during application
- Watering or redness
Corrective action
- Stop working
- Check eye closure and pad position
- If product may have entered the eye, follow chemical eye first aid
- Discontinue the service if stinging continues and suggest medical assessment
Prevention
- Confirm full eye closure before starting
- Keep the glue drop away from the client's face
- Use minimal adhesive
SAF-006Reaction to eye pads, tape or hydrogel
Caution
Likely causes
- Sensitivity to the material
How to identify it
- Redness or itching where the pad or tape sat
Corrective action
- Remove the product
- Choose an alternative
Prevention
- Record the sensitivity on the client card
Cross-references
SAF-007Severe allergic symptoms (facial, lip or tongue swelling; difficulty breathing)
Urgent / emergency
Likely causes
- Severe allergic (anaphylactic) response
How to identify it
- Swelling of the face, lips, tongue or throat
- Difficulty breathing or swallowing
- Feeling faint
Corrective action
- Stop immediately and call 111 (or your local emergency number)
- Follow first aid and any emergency plan the client has
- Stay with the client
- Document the incident
Prevention
- Ask about severe allergies at consultation
- Make sure staff know your emergency procedure
Cross-references
SAF-008Reactions repeat or worsen at later visits
Stop treatment
Likely causes
- Sensitisation to adhesive ingredients that worsens with repeated exposure
How to identify it
- Client history shows earlier reactions
- Symptoms appear sooner or more strongly each visit
Corrective action
- Stop adhesive-based services
- Advise the client to seek medical advice
- Document the reactions and your decision
Prevention
- Ask about symptoms at every visit
- Record every reaction on the client card
SAF-009Sensitivity to remover
Caution
Likely causes
- Ingredient sensitivity
- Remover contact with skin or eye
How to identify it
- Redness or stinging during removal
Corrective action
- Stop
- Rinse the area
- Consider alternatives
Prevention
- Use minimal remover and protect the eye
Cross-references
SAF-010Client reports a scratch or poke from a tool
Stop treatment
Likely causes
- Tool contact with the eye area
How to identify it
- Ask about pain, redness or vision changes
Corrective action
- Stop treatment
- If pain or vision changes, seek urgent medical help
Prevention
- Control tool movement
SAF-011Mild redness of the eyelid skin after treatment
Caution
Likely causes
- Tape or eye pad irritation
- Rubbing
- Sensitivity to a product
How to identify it
- Pink or red skin where tape or pads sat, without swelling, pain or eye symptoms
Corrective action
- Monitor
- Advise the client to seek medical advice if it worsens, spreads, swells or doesn't settle
Prevention
- Use gentle tapes and pads for sensitive clients and record what was used
Cross-references
SAF-012Delayed reaction appears at an infill
Stop treatment
Likely causes
- Sensitivity developing after previous uneventful sets
How to identify it
- Client mentions itching, swelling or redness after the last set
Corrective action
- Do not apply more adhesive
- Advise medical advice
- Document
Prevention
- Ask about any symptoms since the last appointment before every infill
Cross-references
SAF-013Artist develops irritation from adhesive
Caution
Likely causes
- Occupational exposure
How to identify it
- Itching, redness or respiratory symptoms
Corrective action
- Seek medical advice
- Improve ventilation and protection
Prevention
- Workplace health and safety review
Cross-references
SAF-014Client feels faint or unwell
Urgent / emergency
Likely causes
- Low blood sugar
- Anxiety
- A health condition
- Lying flat for a long time
How to identify it
- Client feels dizzy, faint, nauseous or unwell
Corrective action
- Stop
- Help the client sit up slowly
- Follow first aid
- Call 111 if symptoms are severe or don't settle
Prevention
- Ask about health conditions
- Offer water and breaks during long appointments
SAF-015Adhesive on the eyelid skin
Caution
Likely causes
- Adhesive drip
- Extension placed too close to the lid
How to identify it
- Adhesive visible on the lid skin
- Client feels pulling or irritation
Corrective action
- Stop and remove the affected extension carefully according to your training
- Do not apply remover to irritated skin without guidance
- Monitor and advise medical advice if irritation develops
Prevention
- Use minimal adhesive and keep a small gap from the lid
SAF-016Client reports eye pain after appointment
Stop treatment
Likely causes
- Possible injury, chemical exposure or infection
How to identify it
- Client contacts you reporting eye pain after the appointment
Corrective action
- Advise the client to seek urgent medical assessment
- Record the report and follow up
Prevention
- Check comfort before the client leaves
- Give clear aftercare that says when to seek help
SAF-017Incident not reported to the client
Caution
Likely causes
- Fear of complaint
- Uncertainty about what to say
How to identify it
- Records show an incident the client wasn't told about
Corrective action
- Inform the client honestly about what happened and what to watch for
Prevention
- Have a written incident procedure that includes telling the client
Cross-references
SAF-018Unsure whether a symptom is a reaction or irritation
Caution
Likely causes
- Allergic reactions and irritation can look similar
How to identify it
- Symptoms such as redness, itching or swelling with an unclear cause
Corrective action
- Don't try to diagnose
- Advise the client to seek medical advice
- Document what you observed
Prevention
- Train staff to refer rather than diagnose
Cross-references
SAF-019Client wants to continue despite reaction history
Caution
Likely causes
- Client wants extensions despite earlier reactions
How to identify it
- Client history shows reactions
Corrective action
- Decline adhesive services and explain why
- Suggest the client discusses options with a medical professional
Prevention
- Write a clear reaction policy and apply it consistently
Cross-references
16 Retention and premature lash loss
RET-001Extensions falling off within 24–48 hours
Routine
Likely causes
- Bond failure from prep, adhesive, room conditions or contact
- Early water or steam exposure against manufacturer guidance
How to identify it
- Inspect fallen extensions: adhesive with no lash attached means the bond failed
Corrective action
- Investigate prep, contact length and adhesive conditions
Prevention
- Change one variable at a time
RET-002Poor retention through the first week
Routine
Likely causes
- Marginal bonds
- Aftercare problems
How to identify it
- Ask about aftercare and check the pattern of loss
Corrective action
- Review technique and aftercare
Prevention
- Give clear aftercare instructions
RET-003Retention is worse on one eye
Routine
Likely causes
- Sleeping side
- Rubbing
- Weaker technique on the non-dominant side
How to identify it
- Ask about sleeping position
- Review your technique on that side
Corrective action
- Address the cause
Prevention
- Audit technique on both sides
RET-004Inner-corner loss
Routine
Likely causes
- Oils and tears
- Rubbing
- Hard to isolate
- Short lashes
How to identify it
- Check the area and client habits
Corrective action
- Re-prep the inner corners
- Review isolation
Prevention
- Teach careful inner-corner cleansing
RET-005Outer-corner loss
Routine
Likely causes
- Extension weight
- Sleeping position
- Rubbing
How to identify it
- Check extension weight and client habits
Corrective action
- Reduce weight in the outer corners
Prevention
- Map outer corners in proportion to the natural lashes
RET-006Retention suddenly poor for everyone
Routine
Likely causes
- Room conditions
- New product batch
- Ageing adhesive
- Preparation changes
How to identify it
- Compare treatment records across multiple clients
Corrective action
- Isolate and test one variable at a time
Prevention
- Record product batches, dates opened and room conditions
RET-007Retention poor for one client only
Routine
Likely causes
- Lash characteristics
- Preparation
- Lifestyle
- Technique variations
How to identify it
- Compare their history and loss pattern with other clients
Corrective action
- Investigate individual contributing factors
Prevention
- Keep detailed client records
RET-008Retention varies with the season
Routine
Likely causes
- Humidity and temperature changes
- Seasonal shedding
- Lifestyle changes
How to identify it
- Retention records change in a seasonal pattern
Corrective action
- Adjust adhesive choice or room controls for the season
Prevention
- Track conditions and retention all year
Cross-references
RET-009Good initial retention, then rapid loss
Routine
Likely causes
- Marginal bonding
- Inconsistent aftercare
- Physical wear
- Natural shedding
How to identify it
- Inspect fallen lashes and the distribution of loss
Corrective action
- Identify the failure pattern before changing products
Prevention
- Record what the client reports between visits
RET-010Fallen extensions have a natural lash attached
Routine
Likely causes
- Natural shedding (root bulb present) or breakage (no bulb)
How to identify it
- Look for a root bulb on the natural lash
Corrective action
- Explain the growth cycle, or investigate breakage
Prevention
- Teach clients how to check fallen lashes
RET-011Extensions loosen after a long flight
Routine
Likely causes
- Dry cabin air
- Sleeping upright against headrests
- Rubbing tired eyes
How to identify it
- Loss reported after travel
Corrective action
- Explain the effect of travel
- Suggest a contoured eye mask and gentle cleansing after the flight
Prevention
- Include travel tips in aftercare
Cross-references
RET-012Loss after illness or medication change
Routine
Likely causes
- Illness or medication affecting the growth cycle
How to identify it
- Loss with root bulbs after illness or a medication change
Corrective action
- Explain that shedding can change with health
- Suggest medical advice if loss is heavy or patchy
Prevention
- Ask about health changes at each visit
Cross-references
RET-013Loss concentrated in the middle of the lash line
Routine
Likely causes
- Rubbing
- Sleeping position
- Technique issue in that zone
How to identify it
- Loss concentrated across the middle of the lash line
Corrective action
- Check technique in that zone and ask about habits
Prevention
- Audit retention by zone
Cross-references
RET-014Extensions fall off in clumps
Routine
Likely causes
- Stickies
- Adhesive bridging between lashes
How to identify it
- Several extensions come out together, sometimes with natural lashes
Corrective action
- Improve isolation and finish with a full sticky check
Prevention
- Always do a final sticky check
Cross-references
RET-015Loss after a new technique is introduced
Routine
Likely causes
- A change in technique or products
How to identify it
- Retention dropped after the change
Corrective action
- Review the new technique and compare with records
Prevention
- Change one variable at a time
Cross-references
RET-016Retention changes during pregnancy or hormonal changes
Routine
Likely causes
- Hormonal changes affecting the growth cycle
How to identify it
- Retention or shedding changes during pregnancy or hormonal change
Corrective action
- Explain the possible effect and adjust expectations
Prevention
- Ask about changes at each visit
Cross-references
RET-017Loss after using a new skincare product
Routine
Likely causes
- Oil-based or heavy skincare migrating onto lashes
How to identify it
- Loss started after a new product
Corrective action
- Advise lash-safe alternatives and keeping products away from the lash line
Prevention
- Include product guidance in aftercare
Cross-references
RET-018Retention worse on volume than classic
Routine
Likely causes
- Fan weight
- Base quality
- Wrapping
How to identify it
- Volume clients have worse retention than classic clients
Corrective action
- Review fan construction, weight and wrapping
Prevention
- Practise fan bases and wrapping
Cross-references
RET-019Retention worse at the start of the day
Routine
Likely causes
- Room not at working conditions first thing
How to identify it
- Morning appointments show worse retention
Corrective action
- Pre-set the room before the first client
Prevention
- Monitor readings at opening
Cross-references
RET-020Loss after the client swims in chlorine or salt water
Routine
Likely causes
- Chlorine or salt water
- Rubbing with towels
How to identify it
- Loss reported after swimming
Corrective action
- Advise rinsing and gently cleansing after swimming and patting dry
Prevention
- Include swimming guidance in aftercare
Cross-references
RET-021Gaps reappear in the same place
Routine
Likely causes
- A habit or technique issue affecting one area
How to identify it
- The same gap appears at every infill
Corrective action
- Investigate habits and technique in that zone
Prevention
- Record gap locations on client cards
Cross-references
RET-022Retention fine for new clients but poor for regulars
Routine
Likely causes
- Build-up on the lash line
- Weakened lashes from continuous wear
How to identify it
- Long-term clients show worse retention than new clients
Corrective action
- Review cleansing at home and infill prep
- Consider lighter styles
Prevention
- Monitor long-term lash health
Cross-references
17 Aftercare and client behaviour
AFT-001Client isn't cleansing their lashes
Routine
Likely causes
- Fear of losing lashes
- Not shown how
How to identify it
- Visible build-up at the infill
Corrective action
- Re-teach cleansing with a demonstration
Prevention
- Demonstrate cleansing at the first appointment
Cross-references
AFT-002Oil-based products used around the eyes
Routine
Likely causes
- Oil-based removers, cleansers or skincare
How to identify it
- Ask about the client's routine
- Lashes look oily
Corrective action
- Recommend lash-safe, oil-free alternatives
Prevention
- Include product guidance in written aftercare
Cross-references
AFT-003Client sleeps face down or on one side
Routine
Likely causes
- Habit
How to identify it
- Loss concentrated on one side
Corrective action
- Suggest a silk pillowcase or a change of sleeping position
Prevention
- Discuss sleeping habits at consultation
Cross-references
AFT-004Rubbing, picking or pulling at the lashes
Caution
Likely causes
- Itching
- Habit
- Anxiety
- Extensions twisting
How to identify it
- Gaps, broken lashes and missing extensions
Corrective action
- Explain how rubbing and pulling damage natural lashes
- Check the itching isn't a reaction
Prevention
- Teach gentle aftercare and book infills before extensions twist
AFT-005Heat, steam or swimming soon after the appointment
Routine
Likely causes
- Lifestyle
- Aftercare not explained
How to identify it
- Ask about steam, saunas, swimming or hot showers in the first day
Corrective action
- Remind the client of the manufacturer's aftercare timing
Prevention
- Give written aftercare and explain it before the client leaves
Cross-references
AFT-006Incorrect brushing
Routine
Likely causes
- Not shown how
- Brushing wet lashes
How to identify it
- Messy, crossed or tangled lashes
Corrective action
- Demonstrate correct brushing on dry lashes
Prevention
- Give the client a spoolie and written instructions
Cross-references
AFT-007Mascara or lash curlers used on extensions
Routine
Likely causes
- Wanting extra volume or curl
How to identify it
- Residue, clumping or bent extensions
Corrective action
- Advise against mascara and curlers on extensions
Prevention
- Explain why in aftercare
Cross-references
AFT-008Client follows conflicting aftercare advice
Routine
Likely causes
- Online advice
- Previous artists
How to identify it
- Ask where the advice came from
Corrective action
- Clarify your guidance and why it suits your products
Prevention
- Give consistent written aftercare
Cross-references
AFT-009Client uses cotton pads or wipes on their lashes
Routine
Likely causes
- Habitual makeup removal
- Fibres catch on extensions
How to identify it
- Fibres caught in the lashes
- Extensions bent or pulled out
Corrective action
- Show the client how to cleanse with a soft brush and lash-safe foam instead
Prevention
- Include 'no cotton pads or wipes' in written aftercare
AFT-010Client avoids washing their face around the eyes
Routine
Likely causes
- Worry about losing extensions
How to identify it
- Oil, makeup and debris build-up at the infill
Corrective action
- Reassure the client that gentle daily cleansing improves retention
- Demonstrate the routine
Prevention
- Explain why cleansing matters at the first appointment
AFT-011Client sweats heavily during exercise
Routine
Likely causes
- Sweat, salt and oil around the eyes
How to identify it
- Ask about exercise habits
- Loss after workouts
Corrective action
- Advise cleansing the lashes gently after exercise and avoiding rubbing with towels
Prevention
- Tailor aftercare to active clients
AFT-012Client uses heated eyelash curlers or crimpers
Routine
Likely causes
- Wanting extra curl
How to identify it
- Kinked, melted or frizzy extensions
Corrective action
- Advise against heat tools
- Replace damaged extensions at the infill
Prevention
- Explain why heat tools damage extensions
Cross-references
AFT-013Client pulls off extensions that are growing out
Routine
Likely causes
- Itching
- Boredom
- Extensions twisting
How to identify it
- Gaps and broken natural lashes
Corrective action
- Explain that pulling removes or breaks natural lashes
- Book an earlier infill to remove grown-out extensions
Prevention
- Explain how grown-out extensions are removed safely
AFT-014Client uses an eye mask or sleeps with a pillow over the face
Routine
Likely causes
- Pressure and friction overnight
How to identify it
- Bent or crushed extensions
- Loss on one side
Corrective action
- Suggest a contoured eye mask that doesn't touch the lashes
Prevention
- Discuss sleep habits at consultation
Cross-references
AFT-015Client applies eyeliner along the lash line
Routine
Likely causes
- Makeup habits
How to identify it
- Product build-up at the base of extensions
Corrective action
- Recommend a water-based liner away from the bonds, removed gently each night
Prevention
- Include makeup guidance in aftercare
AFT-016Client doesn't understand when to book infills
Routine
Likely causes
- No guidance given
How to identify it
- Coming in with very little coverage left
Corrective action
- Explain the recommended infill interval and pre-book the next appointment
Prevention
- Pre-book infills before the client leaves
AFT-017Client gets lashes wet too soon after the appointment
Routine
Likely causes
- Aftercare instructions not followed or not given
How to identify it
- Ask about the first day after application
Corrective action
- Remind the client of the manufacturer's recommended waiting time
Prevention
- Give written aftercare and explain it verbally
Cross-references
AFT-018Client rubs their eyes due to hay fever or allergies
Routine
Likely causes
- Seasonal allergies
How to identify it
- Loss and twisting in spring
- Itchy eyes
Corrective action
- Advise patting rather than rubbing
- Suggest the client seeks advice from a pharmacist for allergy symptoms
- Check the itching isn't a reaction
Prevention
- Ask about seasonal allergies
18 Infills and long-term maintenance
INF-001Excessive outgrowth by the infill
Routine
Likely causes
- Infill interval too long
- Client missed an appointment
- Fast growth cycle
How to identify it
- Many extensions sitting well away from the lid
- Bonds twisting or drooping
Corrective action
- Remove grown-out extensions before filling
- Allow extra time
- Rebook at a shorter interval
Prevention
- Pre-book the next infill before the client leaves
- Explain why the interval matters
Cross-references
INF-002Grown-out extensions twisting
Caution
Likely causes
- Natural growth pushing bonds away from the lid
- Poor original alignment
- Heavy extensions
How to identify it
- Extensions twisted, sideways or poking
- Client reports scratching
Corrective action
- Remove twisted extensions safely at the infill
- Replace only where the natural lash is suitable
Prevention
- Keep to regular infill intervals
- Align extensions centrally on the lash
INF-003Low remaining coverage at the infill
Routine
Likely causes
- Long interval
- Retention problems
- Heavy natural shedding
How to identify it
- Estimate the percentage of coverage left on each eye
Corrective action
- Decide between an infill and a new set based on coverage and lash condition
- Explain the choice to the client
Prevention
- Have a written policy on minimum coverage for an infill
Cross-references
INF-004Stickies found at the infill
Caution
Likely causes
- Stickies missed at the previous appointment
- Isolation errors
How to identify it
- Natural lashes stuck together, often growing in different directions
Corrective action
- Separate carefully if possible
- Otherwise remove the affected extension with remover rather than pulling
Prevention
- Always finish with a full sticky check
- Review isolation technique
INF-005Old adhesive or debris build-up on the lash line
Routine
Likely causes
- Not cleansing at home
- Makeup
- Oils
How to identify it
- Visible debris, flakes or old adhesive along the lash line
Corrective action
- Cleanse gently and thoroughly before the infill
- Postpone and suggest medical advice if the lash line is inflamed
Prevention
- Re-teach cleansing and give the client a brush and cleanser routine
INF-006Infill results are inconsistent
Routine
Likely causes
- No record of the original map
- Different artist doing the infill
How to identify it
- Infill doesn't match the original style
Corrective action
- Check photos and records
- Follow the original map or agree a new one with the client
Prevention
- Record the map and photograph every set
Cross-references
INF-007Infill on another artist's work with unknown adhesive
Caution
Likely causes
- Foreign fill
How to identify it
- Ask about previous reactions and products used
Corrective action
- Consider removing and starting fresh
- Follow your foreign-fill policy
Prevention
- Written foreign-fill policy
INF-008Not enough time booked for the infill
Routine
Likely causes
- Interval longer than expected
- Heavy loss
How to identify it
- Coverage much lower than planned
Corrective action
- Prioritise removing grown-out extensions and core coverage
- Book extra time next visit
Prevention
- Book infills by coverage, not just interval
INF-009Removing extensions that are still well attached
Routine
Likely causes
- Over-removal at the infill
How to identify it
- Natural lashes stressed or pulled
Corrective action
- Only remove grown-out, twisted or loose extensions
Prevention
- Train staff on what to remove at infills
Cross-references
INF-010Old extensions left in that have grown too far out
Routine
Likely causes
- Under-removal at infills
- Time pressure
How to identify it
- Extensions sitting far out, twisting or poking
Corrective action
- Remove grown-out extensions at each infill
Prevention
- Check every extension at infills and book enough time
Cross-references
INF-011Mixing different styles at the infill
Routine
Likely causes
- Original map not followed
- Different artist
How to identify it
- Uneven appearance with mixed lengths or curls
Corrective action
- Follow the original map, or redesign fully if the style is changing
Prevention
- Record the map on the client card
INF-012Client wants a style change at the infill
Routine
Likely causes
- Client wants a different look
How to identify it
- Request at the infill
Corrective action
- Assess whether an infill can achieve the change or a new set is needed
- Explain timing and cost
Prevention
- Ask about style changes at booking so enough time is allowed
Cross-references
INF-013Client's natural lashes look tired after months of sets
Caution
Likely causes
- Continuous wear
- Heavy extensions
- Long intervals
How to identify it
- Thinning, breakage or shorter lashes
Corrective action
- Recommend lighter styles or a lash rest
- Explain why
Prevention
- Monitor lash health at every visit and photograph changes
Cross-references
INF-014Infill percentage judged inconsistently
Routine
Likely causes
- No standard way to assess coverage
How to identify it
- Different artists charge different infill levels for the same coverage
Corrective action
- Define how coverage is assessed and priced
Prevention
- Write an infill policy that all staff follow
INF-015Applying new extensions next to stickies
Routine
Likely causes
- Stickies not checked before adding new extensions
How to identify it
- Problems worsen and lashes are stressed
Corrective action
- Separate or remove stickies before filling
Prevention
- Do a sticky check at the start of every infill
Cross-references
INF-016Infill interval too short to be worthwhile
Routine
Likely causes
- Infill booked too soon after the last appointment
How to identify it
- Very little new growth or loss to fill
Corrective action
- Adjust the interval to suit the client's growth and loss
Prevention
- Recommend intervals based on each client's history
Cross-references
19 Lash removal and correction
REM-001Adhesive stubborn or removal incomplete
Routine
Likely causes
- Remover not left long enough
- Product type
How to identify it
- Check for remaining bonds
Corrective action
- Allow the remover time to work, following the manufacturer's instructions
Prevention
- Follow the manufacturer's removal protocol
Cross-references
REM-002Remover migrates toward the eye
Stop treatment
Likely causes
- Too much product
- Poor protection
How to identify it
- Client reports stinging
Corrective action
- Stop
- Protect and rinse the eye
- Follow first aid if needed
Prevention
- Use minimal remover and protect the eye
REM-003Excess traction or pulling during removal
Caution
Likely causes
- Rushing
- Remover not fully broken down
How to identify it
- Client discomfort
- Natural lashes removed
Corrective action
- Slow down and allow the remover time to work
Prevention
- Never force an extension off
Cross-references
REM-004Sticky residue left after removal
Routine
Likely causes
- Remover residue left on the lashes
How to identify it
- Lashes feel tacky or oily after removal
Corrective action
- Cleanse thoroughly after removal and dry
Prevention
- Include cleansing as the last removal step
Cross-references
REM-005Removing another artist's poorly applied set
Caution
Likely causes
- Stickies
- Excess adhesive
- Heavy extensions
How to identify it
- Assess the set before starting
Corrective action
- Remove carefully and allow extra time
Prevention
- Charge appropriately and allow time for corrections
Cross-references
REM-006Client requests removal during an active reaction
Stop treatment
Likely causes
- Reaction to adhesive or another product
How to identify it
- Assess the symptoms
Corrective action
- Refer for medical advice before removal
- Do not apply remover to inflamed or broken skin without guidance
Prevention
- Have a reaction policy in place
Cross-references
REM-007Removal taking far longer than expected
Routine
Likely causes
- Adhesive type
- Technique
How to identify it
- Time records
Corrective action
- Follow the manufacturer's guidance for the remover
- Allow enough processing time
Prevention
- Book enough time for removals
Cross-references
REM-008Natural lashes coming out during removal
Caution
Likely causes
- Pulling before the bond has broken down
- Remover not left long enough
How to identify it
- Natural lashes coming away with extensions
- Client discomfort
Corrective action
- Stop pulling
- Allow more processing time as the manufacturer directs
- Slide extensions off gently
Prevention
- Never force an extension off
Cross-references
REM-009Lower lashes not protected during removal
Caution
Likely causes
- Pads or protection not placed correctly
How to identify it
- Remover on lower lashes or skin
- Client stinging
Corrective action
- Stop
- Protect lower lashes and skin
- Rinse if remover has reached the skin or eye
Prevention
- Check protection is in place before applying remover
Cross-references
REM-010Remover left on the lashes after removal
Routine
Likely causes
- Incomplete cleansing after removal
How to identify it
- Lashes feel oily
- New extensions won't bond
Corrective action
- Cleanse thoroughly after removal
Prevention
- Include cleansing in removal steps
Cross-references
REM-011Client tries to remove extensions themselves
Routine
Likely causes
- Cost
- Convenience
- Impatience
How to identify it
- Damaged or missing natural lashes
Corrective action
- Explain the risks of self-removal and offer professional removal
Prevention
- Explain removal options at consultation
Cross-references
REM-012Partial removal leaves gaps
Routine
Likely causes
- Removing only some extensions without a plan
How to identify it
- Uneven look after correction
Corrective action
- Plan which extensions to remove and how to rebalance the set
Prevention
- Plan corrections before starting
Cross-references
REM-013Removal of single extensions damages neighbours
Routine
Likely causes
- Imprecise application of remover
How to identify it
- Neighbouring extensions loosened
Corrective action
- Apply remover precisely to the target extension
Prevention
- Practise single-extension removal
Cross-references
REM-014Uncertain when to remove a full set
Routine
Likely causes
- Uncertain whether a set can be saved
How to identify it
- Set is damaged, unsafe or poorly applied
Corrective action
- Remove the full set if it's unsafe or can't be corrected
Prevention
- Write a removal policy
Cross-references
REM-015Remover causes skin irritation
Caution
Likely causes
- Sensitivity to remover ingredients
How to identify it
- Redness or stinging
Corrective action
- Stop
- Rinse
- Consider alternatives
- Advise medical advice if irritation persists
Prevention
- Record sensitivities on the client card
Cross-references
REM-016Removal not recorded
Routine
Likely causes
- No record kept
How to identify it
- Client records missing removal details
Corrective action
- Record removals, products used, reasons and any issues
Prevention
- Use client cards
Cross-references
20 Tools, equipment and consumables
TLS-001Tweezers losing grip or misaligned
Routine
Likely causes
- Damage
- Wear
- Drops
How to identify it
- Tweezer slips or doesn't close evenly along the tips
Corrective action
- Have the tweezers repaired or replace them
Prevention
- Store tweezers with tip covers
Cross-references
TLS-002Adhesive build-up on tweezer tips
Routine
Likely causes
- Tips not cleaned during the set
How to identify it
- Visible adhesive residue
- Stickies appear later in the set
Corrective action
- Clean the tips during the set as your training directs
Prevention
- Clean regularly during and after every service
Cross-references
TLS-003Poor lighting or magnification
Routine
Likely causes
- Inadequate lamp or magnification
How to identify it
- Eye strain
- Missed stickies
- Difficulty seeing the base
Corrective action
- Upgrade lighting and magnification
Prevention
- Review equipment periodically
TLS-004Lash strips vary in curl or length
Routine
Likely causes
- Manufacturing inconsistency
How to identify it
- Lashes from the same tray differ in curl or length
Corrective action
- Contact the supplier with batch details
Prevention
- Test new trays before use
Cross-references
TLS-005Eye pads are poor quality or dry out
Routine
Likely causes
- Pad quality
- Pads drying out
How to identify it
- Pads lift, dry out or irritate the skin
Corrective action
- Change product
Prevention
- Test new pads before using them on clients
Cross-references
TLS-006Ergonomic strain from tools and setup
Routine
Likely causes
- Tool design
- Station height
- Posture
How to identify it
- Hand, neck or back pain
Corrective action
- Adjust your setup and tools
Prevention
- Do an ergonomic review
Cross-references
TLS-007Tweezer tips bent after dropping
Routine
Likely causes
- Dropped tools
How to identify it
- Tips misaligned or bent
Corrective action
- Have the tweezers repaired or replace them
Prevention
- Use tip covers and a tool mat
Cross-references
TLS-008Wrong tweezer type for the technique
Routine
Likely causes
- Wrong tweezer for the technique
How to identify it
- Difficulty picking up or isolating
Corrective action
- Choose tweezers suited to classic or volume
Prevention
- Test tools before buying in bulk
Cross-references
TLS-009Magnifying lamp distorts or strains eyes
Routine
Likely causes
- Lens quality
How to identify it
- Eye strain or distortion at the edges
Corrective action
- Upgrade magnification
Prevention
- Review equipment
Cross-references
TLS-010Tape loses grip during the appointment
Routine
Likely causes
- Tape quality
- Oily skin
How to identify it
- Tape lifts during the set
Corrective action
- Choose a more suitable tape and cleanse the skin where it sits
Prevention
- Test tapes on different skin types
Cross-references
TLS-011Glue ring or tile not suited to adhesive
Routine
Likely causes
- Surface not suited to the adhesive
How to identify it
- Glue drop beads, spreads or cures unusually
Corrective action
- Use the surface the manufacturer recommends
Prevention
- Follow manufacturer guidance
Cross-references
TLS-012Lash strips inconsistent in length
Routine
Likely causes
- Manufacturing inconsistency
How to identify it
- Measured lengths differ from the label
Corrective action
- Contact the supplier with batch details
Prevention
- Test trays
Cross-references
TLS-013Mirror or camera not available to show the client
Routine
Likely causes
- Station setup
How to identify it
- Client can't see the result before leaving
Corrective action
- Provide a mirror and offer to take a photo
Prevention
- Include a mirror in the station checklist
Cross-references
TLS-014Lash bed uncomfortable
Routine
Likely causes
- Bed too firm or unsupportive
How to identify it
- Client complaints about comfort
Corrective action
- Upgrade the bed or add padding and neck support
Prevention
- Review equipment
Cross-references
TLS-015Tools not organised
Routine
Likely causes
- No station layout
How to identify it
- Time lost searching for tools
Corrective action
- Organise the station
Prevention
- Use a setup checklist
Cross-references
TLS-016Cheap consumables used to save money
Routine
Likely causes
- Choosing on price alone
How to identify it
- Poor results or inconsistent batches
Corrective action
- Invest in quality consumables
Prevention
- Review suppliers on quality and consistency
Cross-references
21 Hygiene, sanitation and cross-contamination
HYG-001Single-use items reused
Caution
Likely causes
- Cost saving
- Habit
- Unclear policy
How to identify it
- Audit consumable use at the station
Corrective action
- Stop reusing and dispose of single-use items after each client
Prevention
- Write a disposables policy
Cross-references
HYG-002Tools not cleaned or disinfected between clients
Caution
Likely causes
- No set process
How to identify it
- Audit the cleaning procedure
Corrective action
- Clean and disinfect tools according to your infection-control procedure and the product directions
Prevention
- Use a written procedure
Cross-references
HYG-003Product contaminated (e.g. double-dipping)
Caution
Likely causes
- Double-dipping applicators
- Touching products with used tools
How to identify it
- Observe practice
Corrective action
- Discard the contaminated product
Prevention
- Use disposable applicators
Cross-references
HYG-004Poor hand hygiene
Caution
Likely causes
- Habit
- No hand-wash station nearby
How to identify it
- Observe practice
Corrective action
- Wash or sanitise hands before and after each client
Prevention
- Set up a hygiene station
Cross-references
HYG-005Debris or build-up visible on the client's lash line
Routine
Likely causes
- Poor cleansing
How to identify it
- Inspect under magnification
Corrective action
- Cleanse gently
- Postpone and suggest medical advice if the area is inflamed
Prevention
- Teach lash-line cleansing
HYG-006Incident not documented
Caution
Likely causes
- No reporting procedure
How to identify it
- Check incident records
Corrective action
- Record the incident now with the date, what happened and the action taken
Prevention
- Keep an incident log
Cross-references
HYG-007Treating a client with a visible skin or eye infection
Caution
Likely causes
- Pressure to keep the appointment
- Not checking the eye area
How to identify it
- Signs of infection noticed during or after treatment
Corrective action
- Stop and postpone the treatment
- Advise the client to seek medical advice
- Clean and disinfect everything used
Prevention
- Have a clear policy and pre-appointment reminder about rescheduling
HYG-008Bed linen not changed between clients
Caution
Likely causes
- Time pressure
- No spare linen
How to identify it
- Linen not changed between clients
Corrective action
- Change linen or use disposable covers for every client
Prevention
- Keep enough linen for a full day
Cross-references
HYG-009Tools stored uncovered
Caution
Likely causes
- No covered storage
How to identify it
- Clean tools left exposed
Corrective action
- Store clean tools in a covered container
Prevention
- Include storage in your infection-control procedure
Cross-references
HYG-010Disinfectant used incorrectly
Caution
Likely causes
- Wrong dilution or contact time
How to identify it
- Check against the product label
Corrective action
- Follow the product's directions for dilution and contact time
Prevention
- Train staff and post the instructions at the cleaning station
Cross-references
HYG-011Mascara wands or brushes reused
Caution
Likely causes
- Reusing mascara wands or brushes between clients
How to identify it
- Observe practice
Corrective action
- Use single-use wands or give the client their own to take home
Prevention
- Make single-use wands part of your disposables policy
Cross-references
HYG-012Work surface not cleaned
Caution
Likely causes
- Rushing between clients
How to identify it
- Work surfaces not wiped down
Corrective action
- Clean and disinfect surfaces between clients
Prevention
- Include surface cleaning in the turnover checklist
Cross-references
HYG-013Gloves or masks not used where required
Caution
Likely causes
- Unclear policy
How to identify it
- Gloves or masks not worn where your policy requires
Corrective action
- Follow your salon's policy and any local requirements
Prevention
- Write and review your PPE policy
Cross-references
HYG-014Product contaminated by touching nozzle
Caution
Likely causes
- Touching the nozzle with fingers or tools
How to identify it
- Observe practice
Corrective action
- Avoid touching nozzles
- Wipe them with a clean lint-free wipe
Prevention
- Include nozzle care in training
Cross-references
HYG-015No written infection control procedure
Caution
Likely causes
- No system in place
How to identify it
- No written infection-control procedure exists
Corrective action
- Write a procedure covering hands, tools, surfaces, linen, products and waste
Prevention
- Review it at least once a year
Cross-references
HYG-016Waste not disposed of correctly
Caution
Likely causes
- Habit
- No suitable bins
How to identify it
- Waste not disposed of correctly
Corrective action
- Dispose of waste correctly
Prevention
- Provide suitable bins and include disposal in your procedure
Cross-references
22 Finished-set quality and visual defects
FIN-001Uneven density across the set
Routine
Likely causes
- Coverage gaps
- Natural density differences
How to identify it
- Brush through and check from several angles
Corrective action
- Fill the gaps or balance with styling
Prevention
- Map density before starting
FIN-002Messy top line
Routine
Likely causes
- Attachment angles
- Poor top-layer isolation
How to identify it
- View the lashes from above
Corrective action
- Correct angles on the top layer so lashes sit in line
Prevention
- Work layer by layer
Cross-references
FIN-003Chunky bases or visible adhesive
Routine
Likely causes
- Thick fan bases
- Excess adhesive
- Heavy diameter
How to identify it
- Inspect individual bonds
Corrective action
- Improve fan construction and adhesive pickup
Prevention
- Calibrate dip depth
FIN-004Fans drooping
Routine
Likely causes
- Fans too heavy
- Weak natural lashes
How to identify it
- Fans droop from the lash
Corrective action
- Reduce fan weight
Prevention
- Match fans to natural lash strength
Cross-references
FIN-005Transitions are obvious
Routine
Likely causes
- Abrupt changes in length or curl
How to identify it
- Check the line with the eyes open
Corrective action
- Blend the transitions with intermediate lengths
Prevention
- Plan gradual steps in the map
Cross-references
FIN-006Result differs from what the client expected
Routine
Likely causes
- Expectations not agreed
How to identify it
- Revisit the consultation notes
Corrective action
- Discuss adjustments
Prevention
- Agree the look in writing or with a photo reference
FIN-007Set looks sparse despite good coverage
Routine
Likely causes
- Fan width
- Curl
- Colour
- Lash distribution
- Natural lash density
How to identify it
- Compare coverage with visible density
Corrective action
- Adjust the design while respecting natural lash capacity
Prevention
- Set expectations about density
Cross-references
FIN-008Lashes point in different directions
Routine
Likely causes
- Misaligned bases
- Inconsistent attachment
- Twisting growth
How to identify it
- View from above and beneath
Corrective action
- Correct the angle and attachment position
Prevention
- Map direction before starting
Cross-references
FIN-009Visible gap between top and bottom layers
Routine
Likely causes
- Top and bottom layers mapped to very different lengths
- Bottom layer left sparse
How to identify it
- A visible gap or 'double line' between layers when the eye is open
- Check from the front and in profile
Corrective action
- Blend layer lengths so the bottom layer supports the top
- Fill sparse bottom-layer lashes where the natural lash allows
Prevention
- Map top and bottom layers together and check them with the eye open
Cross-references
FIN-010Texture looks flat
Routine
Likely causes
- Uniform lengths and curls throughout the set
How to identify it
- Set looks flat or solid rather than textured
- Client wants a more fluffy or natural finish
Corrective action
- Add texture by mixing lengths within each zone and varying spikes or wisps if the style suits
Prevention
- Plan texture in the map and photograph examples for consultations
Cross-references
FIN-011Colour inconsistent
Routine
Likely causes
- Mixing trays from different batches or brands
- Colour fading in storage
How to identify it
- Some extensions look browner, greyer or shinier than others
Corrective action
- Replace mismatched extensions at the next visit
- Use trays from the same batch
Prevention
- Check trays before starting and store them away from light
Cross-references
FIN-012Lashes look clumpy after brushing
Routine
Likely causes
- Stickies
- Brushing before bonds set
- Adhesive bridging
How to identify it
- Lashes clump together when brushed
Corrective action
- Separate the stickies or remove affected extensions
- Brush through again
Prevention
- Finish every set with a full sticky check
Cross-references
FIN-013Outer corners look unfinished
Routine
Likely causes
- Running out of time
- Outer corners left until last
How to identify it
- Outer corners look sparse, short or uneven compared with the rest
Corrective action
- Complete and balance the outer corners before finishing
Prevention
- Protect finishing time and don't always leave outer corners until last
Cross-references
FIN-014Set looks different in photos
Routine
Likely causes
- Different lighting, angles or camera settings
How to identify it
- Set looks fuller or thinner in photos than in person
Corrective action
- Photograph under the same light, at the same angle, with the eyes open and closed
Prevention
- Set up a consistent photo spot
Cross-references
FIN-015Inner corner gaps
Routine
Likely causes
- Short or fine inner lashes skipped
- Awkward access
How to identify it
- Gaps visible at the inner corner when brushed
Corrective action
- Fill inner corners with short, light extensions where the natural lashes can support them
Prevention
- Check inner corners as part of the final coverage check
Cross-references
FIN-016Set doesn't suit the client's face
Routine
Likely causes
- Style not matched to eye shape, features or lifestyle
How to identify it
- The set technically looks clean but doesn't flatter the client
Corrective action
- Discuss adjustments and change the map at the next visit
Prevention
- Assess eye shape, features and lifestyle at consultation
Cross-references
FIN-017Excess adhesive visible
Routine
Likely causes
- Over-dipping
- Slow placement
How to identify it
- Adhesive visible at the bond or on neighbouring lashes
Corrective action
- Reduce adhesive pickup and smooth bonds as you place
Prevention
- Calibrate dip depth
Cross-references
FIN-018Final brush-through not done
Routine
Likely causes
- Habit
- Running late
How to identify it
- Lashes left unbrushed or crossed when the client sits up
Corrective action
- Brush through gently once bonds have set and check from the client's sitting position
Prevention
- Include the final brush-through in the finishing checklist
Cross-references
23 Complaints, communication and service recovery
CMP-001Client complains about poor retention
Routine
Likely causes
- Technique
- Aftercare
- Natural shedding
How to identify it
- Inspect the lashes and ask about aftercare and loss pattern
Corrective action
- Investigate before blaming anyone
Prevention
- Set expectations at consultation
CMP-002Client reports discomfort after the appointment
Caution
Likely causes
- Placement
- Possible reaction
How to identify it
- Screen for safety symptoms first
Corrective action
- Follow the safety pathway
Prevention
- Run final comfort checks before the client leaves
CMP-003Client unhappy with styling
Routine
Likely causes
- Style not agreed clearly
- Map not suited to the eye
- Result differs from inspiration
How to identify it
- Compare the result with consultation notes and any reference photos
Corrective action
- Listen to what the client dislikes
- Offer an adjustment appointment
- Record what was agreed
Prevention
- Agree the style and show examples before starting
Cross-references
CMP-004Client requests a refund or correction
Routine
Likely causes
- Dissatisfaction with retention, comfort or style
How to identify it
- Review records, photos and when the problem appeared
Corrective action
- Follow your written policy on corrections and refunds
- Offer a correction where the issue is technical
Prevention
- Have a clear, written policy and share it at booking
Cross-references
CMP-005Repeat complaints from the same client
Routine
Likely causes
- Expectations not resolved
- Underlying issue not identified
- Service not suitable
How to identify it
- Review the client's history for patterns
Corrective action
- Discuss honestly whether the service suits the client's lashes or lifestyle
- Investigate technique and aftercare
Prevention
- Document every complaint and the actions taken
CMP-006Client following other aftercare advice
Routine
Likely causes
- Advice from other artists, friends or online sources
How to identify it
- Ask what the client is doing at home
Corrective action
- Explain your aftercare and the reasons behind it
- Agree a routine
Prevention
- Give written aftercare and keep it consistent across staff
Cross-references
CMP-007No record to support a complaint discussion
Routine
Likely causes
- No photos or notes
- Verbal-only consultations
How to identify it
- You can't confirm what was agreed or done
Corrective action
- Discuss what you can verify
- Record the conversation and outcome
Prevention
- Photograph every set and keep consultation records
Cross-references
CMP-008Client sends photos showing poor retention
Routine
Likely causes
- Retention, aftercare or technique issues
- Natural shedding
How to identify it
- Review the photos for patterns such as gaps, clumps or one-sided loss
Corrective action
- Invite the client in so you can assess the lashes in person before agreeing next steps
Prevention
- Have a clear policy on retention checks and corrections
Cross-references
CMP-009Client leaves a negative online review
Routine
Likely causes
- Dissatisfaction not resolved in the salon
How to identify it
- Read the review carefully and check the client's records
Corrective action
- Respond publicly in a calm, professional way and offer to resolve it privately
Prevention
- Ask for feedback before clients leave so issues are raised in person
Cross-references
CMP-010Client disputes payment
Routine
Likely causes
- Dissatisfaction with the result
- Misunderstanding about price
How to identify it
- Review records and the terms agreed at booking
Corrective action
- Follow your policy
- Offer a correction where appropriate
Prevention
- Make prices and terms clear at booking
Cross-references
CMP-011Client says another artist's sets last longer
Routine
Likely causes
- Comparing retention with another salon
How to identify it
- Ask about the other set's style, weight and infill interval
Corrective action
- Investigate your retention honestly and explain the factors involved, including weight and aftercare
Prevention
- Set expectations at consultation
Cross-references
CMP-012Client complains about the cost of infills
Routine
Likely causes
- Pricing not explained
- Long infill intervals increasing cost
How to identify it
- Client questions the cost of infills
Corrective action
- Explain how infills are priced and how regular intervals keep costs down
Prevention
- Make pricing clear and available online
Cross-references
CMP-013Client expects free fixes indefinitely
Routine
Likely causes
- Correction policy unclear or applied inconsistently
How to identify it
- Client expects free fixes at any time
Corrective action
- Explain your correction policy and the time frame it covers
Prevention
- Write a clear policy and apply it consistently
Cross-references
CMP-014Staff give different advice
Routine
Likely causes
- Inconsistent training between staff
How to identify it
- Clients report conflicting advice
Corrective action
- Standardise aftercare and technical advice
Prevention
- Train all staff from the same written material
Cross-references
CMP-015Complaint not followed up
Routine
Likely causes
- No complaints procedure
How to identify it
- Complaint records show no follow-up
Corrective action
- Contact the client, apologise for the delay and resolve the issue
Prevention
- Have a complaints procedure with response times
Cross-references
CMP-016Client unhappy with appointment length
Routine
Likely causes
- Client expected a shorter appointment
How to identify it
- Client says the appointment took too long
Corrective action
- Explain how long each service takes and why
Prevention
- Give expected timings at booking
Cross-references
CMP-017Client becomes upset or aggressive
Routine
Likely causes
- Dissatisfaction
- Stress
- Misunderstanding
How to identify it
- Raised voice or aggressive behaviour
Corrective action
- Stay calm and listen
- Follow your policy
- Ask the client to leave if staff safety is at risk
Prevention
- Train staff in de-escalation
Cross-references
24 Artist performance and advanced diagnostics
ART-001Adhesive chosen is faster than your attachment speed
Routine
Likely causes
- Choosing speed you'd like to work at, rather than your current speed
How to identify it
- Time from dip to placement
Corrective action
- Choose an adhesive matched to your actual speed
Prevention
- Reassess as your speed changes
ART-002Mistaking speed for efficiency
Routine
Likely causes
- Rushing placement
How to identify it
- Retention and stickies worsen as speed increases
Corrective action
- Prioritise accuracy
Prevention
- Build speed through efficient movement, not rushing
ART-003Results vary between clients
Routine
Likely causes
- Process varies between clients
- Different adhesive or prep
- Inconsistent mapping
How to identify it
- Compare records and photos for clients with similar lashes
Corrective action
- Standardise your process from consultation to finish
Prevention
- Use written checklists and record each set
Cross-references
ART-004Difficulty with a specific lash layer
Routine
Likely causes
- Poor visibility of that layer
- Hand position
- Client head angle
How to identify it
- Stickies, gaps or direction issues concentrated in one layer
Corrective action
- Practise that layer specifically and adjust positioning
Prevention
- Use targeted drills on a training head
Cross-references
ART-005Work on the non-dominant side is weaker
Routine
Likely causes
- Awkward access
- Hand position
- Less practice
How to identify it
- Compare retention and finish on each eye across several clients
Corrective action
- Adjust your position or move around the bed for the weaker side
Prevention
- Practise the weaker side and audit it regularly
Cross-references
ART-006Blaming aftercare without auditing the set
Routine
Likely causes
- Assumption
- Reluctance to self-critique
How to identify it
- Retention complaints are always attributed to aftercare
Corrective action
- Audit the set (attachment, contact, isolation) before discussing aftercare with the client
Prevention
- Self-audit regularly using photos of fallen extensions
ART-007Hand fatigue and poor ergonomics
Routine
Likely causes
- Station setup
- Posture
- Long days
How to identify it
- Pain or fatigue in the hands, wrists, neck or back
Corrective action
- Adjust your setup and take short breaks between clients
Prevention
- Schedule breaks and stretch during the day
Cross-references
ART-008Inaccurate self-assessment
Routine
Likely causes
- No objective review
- No comparison with standards
How to identify it
- Your view of your work differs from client or mentor feedback
Corrective action
- Photograph sets and get peer or educator review
Prevention
- Book regular mentoring
Cross-references
ART-009Changing several variables at once
Routine
Likely causes
- Frustration
- Trying to fix everything at once
How to identify it
- Several products or techniques changed at the same time
Corrective action
- Go back to a known setup and change one variable at a time
Prevention
- Record every change with the date
Cross-references
ART-010Not keeping up with education
Routine
Likely causes
- Time
- Cost
- Confidence
How to identify it
- No recent training or refresher
Corrective action
- Plan ongoing education each year
Prevention
- Keep a training plan and budget
Cross-references
ART-011Copying techniques from social media without training
Routine
Likely causes
- Following social media trends
How to identify it
- Using techniques without training or understanding the risks
Corrective action
- Seek proper training before offering a new technique
Prevention
- Check that sources are qualified educators
Cross-references
ART-012Not photographing work
Routine
Likely causes
- Habit
- Time
How to identify it
- No photos of recent sets
Corrective action
- Photograph every set before and after
Prevention
- Include photos in your finishing checklist
Cross-references
ART-013Burnout from long days
Routine
Likely causes
- Long days
- Heavy bookings
- No breaks
How to identify it
- Fatigue
- Quality slipping late in the day
Corrective action
- Adjust your schedule and booking limits
Prevention
- Plan breaks and days off
Cross-references
ART-014Eye strain
Routine
Likely causes
- Poor lighting
- Weak magnification
- Long periods of close work
How to identify it
- Headaches
- Tired or dry eyes
Corrective action
- Improve lighting and take regular breaks
Prevention
- Have regular eye checks with an optometrist
Cross-references
ART-015Gaps in foundational knowledge
Routine
Likely causes
- Gaps in initial training
How to identify it
- Recurring basic errors
Corrective action
- Refresh foundational skills
Prevention
- Plan refresher training
Cross-references
ART-016Not tracking retention
Routine
Likely causes
- No system for recording retention
How to identify it
- No retention records to compare
Corrective action
- Record retention at every infill
Prevention
- Use client cards
Cross-references
ART-017Avoiding difficult feedback
Routine
Likely causes
- Low confidence
- Fear of criticism
How to identify it
- Avoiding mentor or peer feedback
Corrective action
- Ask for specific feedback on one area at a time
Prevention
- Book regular mentoring
Cross-references
ART-018Repeated mistakes
Routine
Likely causes
- Habit
- Lack of review
How to identify it
- The same errors appear in audits
Corrective action
- Identify the root cause and practise the correction
Prevention
- Audit your work regularly
Cross-references
This matrix is an education resource for trained lash professionals. It does not replace manufacturer instructions, salon policy or medical advice. Lash artists must not diagnose, treat or medicate eye or skin conditions; refer clients to a GP, pharmacist, optometrist or emergency services as indicated.
